Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 04-15-2012, 10:17 AM   #1
dekan513
chevy pride
 
dekan513's Avatar
 
Drives: 2ss/rs
Join Date: Feb 2012
Location: pikeville ky
Posts: 2,141
lg g6x3 with stroker

im putting a g6x3 cam in and was going to do a stroker this winter is that a compatible came with stroker kit or a good cam with it
__________________

check out ky speeds fb page https://www.facebook.com/kyspeed
dekan513 is offline   Reply With Quote
Old 04-15-2012, 10:51 AM   #2
InfernoSS454
 
InfernoSS454's Avatar
 
Drives: 2010 camaro ss
Join Date: Feb 2012
Location: houston,texas
Posts: 382
I'm sure u can make it work.
__________________
Texas speeds 1 7/8 longtube headers and full exhaust vararam air intake. Lethal racings night fury cam and yank 3400 stall. Dyno tuned by lethal racing 465 rwhp 434 rwtq.
InfernoSS454 is offline   Reply With Quote
Old 04-15-2012, 01:23 PM   #3
hunt
 
Drives: 10 SS 08 675 13 Stryker 10 S1000RR
Join Date: Jan 2010
Location: Lincoln, CA
Posts: 216
If you get stroked with a g6x3, make sure your pistons come flycut..
__________________
Never put up with something high maintenance, unless it's high performance.
hunt is offline   Reply With Quote
Old 04-15-2012, 08:28 PM   #4
Rage
TRI-COUNTY CAMARO... FTW!
 
Rage's Avatar
 
Drives: 2010 Camaro 2SS M6 Cyber Grey
Join Date: May 2010
Location: South Florida
Posts: 1,200
Quote:
Originally Posted by hunt View Post
If you get stroked with a g6x3, make sure your pistons come flycut..
Im not sure you need to flycut with a stroker, as long as you keep the top end stock...... just dont mill the heads and you will be fine. PTV clearance is optimal on a stock setup..... I know, cuz I have
__________________
CAI inc. cold air intake, LG G6x3 cam, Patriot Gold Extreme Dual springs, Titanium retainers and locks, LG SuperPro 1 7/8 Long Tube headers with full 3" exhaust, DynoMax VT mufflers, SLP 4" tips, Moroso catch can, Race Ready electronic exhaust cut outs, Full painted Razzi body kit, Headlight Armor Smoke taillight and marker blackouts, T-Rex aluminum upper and lower grille, Polished aluminum front and rear bowties. Professionally installed and Dyno Tuned by HorsePower Sales, Pompano Beach FL.
Rage is offline   Reply With Quote
Old 04-15-2012, 08:58 PM   #5
Andy@AMSOIL
Account Suspended
 
Drives: 4 wheels
Join Date: Oct 2011
Location: Digging for OIL
Posts: 262
There are plenty shops that have proven combinations like these on their own shop cars or customer cars,,, the only way for you to do it is to start bolting cams onto your top end and dyno the car to find out.

But I think you are working backwards,,, you want to build the engine before you try to find out what cam works for you,,, or you follow the build path that someone has already proven to work
Andy@AMSOIL is offline   Reply With Quote
Old 04-15-2012, 09:37 PM   #6
InfernoSS454
 
InfernoSS454's Avatar
 
Drives: 2010 camaro ss
Join Date: Feb 2012
Location: houston,texas
Posts: 382
What are u stroking it out too. I plan to do the same.
__________________
Texas speeds 1 7/8 longtube headers and full exhaust vararam air intake. Lethal racings night fury cam and yank 3400 stall. Dyno tuned by lethal racing 465 rwhp 434 rwtq.
InfernoSS454 is offline   Reply With Quote
Old 04-16-2012, 02:07 AM   #7
jo0oker
 
jo0oker's Avatar
 
Drives: 2010 camaro ss
Join Date: Dec 2009
Location: Richmond, VA
Posts: 72
Check out my car...!

A6 2010 camaro
- Magnaflow Cat Back Stainless.
- 1 7/8"x 3" Dynatech Headers.
- SLP Underdrive Pulley.
- LMR CAI.
- TSP Rotating Assembly 416 C.I.D 12.5:1 Compression Ratio
- Vengeance Racing VVT Delete Kit to LS3.
- LGmotorsports G6x3 Camshaft.
- TSP Fully CNC Ported L92 Heads.
- FAST LSXR 102mm Intake Manifold.
- Nick Williams 102mm Throttle Body.
- FAST Fuel Injectors(50 lb/hr).
- 3.73 Gear.
- 3600 Yank.

508 rwhp
jo0oker is offline   Reply With Quote
Old 04-19-2012, 04:56 PM   #8
ULTRAZLS1


 
ULTRAZLS1's Avatar
 
Drives: 14 Silverado LTZ Z71, 16 Camaro SS
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,271
Quote:
Originally Posted by jo0oker View Post
Check out my car...!

A6 2010 camaro
- Magnaflow Cat Back Stainless.
- 1 7/8"x 3" Dynatech Headers.
- SLP Underdrive Pulley.
- LMR CAI.
- TSP Rotating Assembly 416 C.I.D 12.5:1 Compression Ratio
- Vengeance Racing VVT Delete Kit to LS3.
- LGmotorsports G6x3 Camshaft.
- TSP Fully CNC Ported L92 Heads.
- FAST LSXR 102mm Intake Manifold.
- Nick Williams 102mm Throttle Body.
- FAST Fuel Injectors(50 lb/hr).
- 3.73 Gear.
- 3600 Yank.

508 rwhp
youve got some nice vids on youtube
__________________
Black 2016 1SS A8-Drag Pack, CAI, Headers, Ported MSD, Ported TB, Shrader RSD, Front Seat Pull, 20lb battery, Carbon Driveshaft, Air Scoop, Exhaust Dump, Front Drag Brakes, Pump E85. 3550 RW
10.69@127.88 1/4 - 6.84@101.27 1/8
1.54 60ft. Stock suspension/gears/converter.
490RWHP/487RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 04-19-2012, 05:10 PM   #9
dekan513
chevy pride
 
dekan513's Avatar
 
Drives: 2ss/rs
Join Date: Feb 2012
Location: pikeville ky
Posts: 2,141
416 probably ive seen where some have done with a g6x3 just looking further into it
__________________

check out ky speeds fb page https://www.facebook.com/kyspeed
dekan513 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for an aggresive cam setup thats just under the G6X3 turbo222 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 32 11-21-2012 05:19 PM
Livernois Motorsports New "Mini" Stroker Chris@Livernois Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 27 10-18-2011 06:55 PM
LS3 Forged Stroker Engine Build By Jannetty Racing Slim2SS Forced Induction - V8 39 08-30-2010 02:28 PM
LG g6x3 and 4:10 gear Combo...My Feedback Mr. Brownstone Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 40 02-24-2010 01:41 PM


All times are GMT -5. The time now is 07:23 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.