You are browsing camaro5 
 |
|
05-20-2012, 03:10 AM
|
#1 | |
|
Booooosted.
|
Rear end clicking noise 'Thrust Washer' TSB.... DIY video.
Ok. there have been a number of people with the clicking noise the 'TINK' coming from the rear wheels. In this video you can here the noise for comparison and see the fix.
My noise is completely gone. I started a thread introducing my problem and ended up getting linked with the thread that TAG UR IT wound up finding for a dealer fix. TSB# 09-04-95-001B Washer: 20825083 Nut: 13217120 The TSB is documented but many of us are modified and have no warranty. Easy fix for the DIYer. Special thanks to Maureen and the folks at Rogers Chevrolet for getting me the parts so quickly. They really do come through quickly for me every time.  The video is kinda long and has a lot of stuff for the total newbs but gives a perfectly accurate showing of what exactly the procedure is and does. EDIT: The TSB says to tighten the axle nut to 199 ft lbs. In my vid I tightened to 159 per advise from a third party. I'd go with 199 to be safe.
__________________
 Last edited by PQ; 06-08-2012 at 11:54 AM. |
|
|
|
|
05-20-2012, 03:39 AM
|
#2 |
|
CamaroFans.com
|
Great DIY Video for anyone affected by this noise... I especially liked the torque Aghhhhhh specifications... 
__________________
 |
|
|
|
|
05-20-2012, 10:56 AM
|
#3 | |
|
Booooosted.
|
Quote:
 Bout Nine and a half pounds if it's just a little one. LOL
__________________
|
|
|
|
|
|
05-20-2012, 11:00 AM
|
#4 |
            
Drives: 2006 Silverado SS, 2009 G8 GT Join Date: Aug 2008
Location: PNW
Posts: 13,313
|
"Leave it to me.... gotta break something.... damn it".
LMAO Great write up PQ!  
|
|
|
|
|
05-20-2012, 11:00 AM
|
#5 | |
|
Booooosted.
|
Quote:
 Oh, and looked on line and the sensor is only 17.00 
__________________
|
|
|
|
|
|
05-20-2012, 03:55 PM
|
#6 |
Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008
Location: Eufaula, Alabama
Posts: 6,427
 |
I was really saddened to watch that movie. WHERE THE HELL WAS THE BLOOD SQUIRTING?? Your worked on your car and no blood? Boring
  
|
|
|
|
|
05-21-2012, 12:24 AM
|
#7 |
|
Booooosted.
|
No blood this time. I finally learned it's better to break car parts than bones.
__________________
|
|
|
|
|
05-21-2012, 02:27 PM
|
#8 |
|
I went to dlr with this clicking noise when i sit at stop, as some have discribed, and he tells me, oh no thats not the problem, yours is a STATIC sound because your not moving, and there is NO TSB on this that describes what your telling me..? my tsb report says its from hard acceleration.
but i made an appointment anyways..will update when i get back from dlr wednesday. |
|
|
|
|
05-21-2012, 02:42 PM
|
#9 | |
|
Booooosted.
|
Quote:
__________________
|
|
|
|
|
|
05-21-2012, 08:07 PM
|
#10 |
Drives: 2SS/RS Join Date: Sep 2008
Location: Western North Carolina
Posts: 7,179
|
"Believe it or not I'm actually pretty safe. Just keep me away from spinning wheels."
|
|
|
|
|
05-21-2012, 08:09 PM
|
#11 |
|
Drives: 2SS/RS Join Date: Sep 2008
Location: Western North Carolina
Posts: 7,179
|
Oh and a quick question, why are you using red loctite, why not blue? Red requires you to use a torch if you ever need to remove them again.
|
|
|
|
|
05-21-2012, 10:17 PM
|
#12 | |
|
Booooosted.
|
Quote:
 Never had a problem before. Considering they are in the hub I can just run some hot laps and then come back and they should be pretty hot.
__________________
|
|
|
|
|
|
05-22-2012, 12:12 PM
|
#13 |
|
great glad that was it.
__________________
 Her Hot Rod. |
|
|
|
|
05-22-2012, 01:59 PM
|
#14 |
|
Booooosted.
|
Heck, I'm still at a loss to how the hell that can even make noise.
__________________
|
|
|
|
|
|
|
|
 |
|
|
