03-06-2014, 12:00 AM | #1 |
BUMBL Z
|
how to completely eliminate rear deck rattle?
i did the screw mod, even added extra screws, added a sub to handle the low end instead of the decklid speakers, and no matter what i do, i'm getting rattling. i'm a windows-down, loud music kinda guy, and this incessant rattling just makes listening to remotely bassy music not enjoyable. what is a sure-fire way(s) to get rid of this rattling for good? dynamat, foam, let's hear them.
p.s. "lower the bass" is not the answer i'm looking for, i bought a subwoofer for a reason
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
03-06-2014, 12:06 AM | #2 |
|
Fatmat, dynamat, hushmat, any premium car sound deadener should do it, be sure to locate where the rattles are coming from
|
03-06-2014, 12:49 PM | #3 |
Dynamat is your best bet. Just buy the bulk pack from amazon and it should fix your rattle problem. It did for me... at least in the trunk and rear deck...
__________________
Ark N-II catback exhaust, ZL1 bumper, JL C5 comps, JL 10w7, JL 500/1v2, JL 300/4v2
|
|
03-06-2014, 01:19 PM | #4 |
Drives: 2011 Camaro SS/RS LS3 Join Date: Aug 2010
Location: Texas
Posts: 1,630
|
turn the music off
__________________
Yeah, I'll get around to it...
|
03-06-2014, 01:34 PM | #5 |
Drives: 2012 1LS Join Date: Oct 2013
Location: Leander, TX
Posts: 257
|
__________________
2012 1LS, Cold Air Inductions CAI, Apex scoop, Apex water bottle relocation, VMax Ported TB, Vitesse Throttle Controller, BMR Sway bars, BMR 1.2" drop springs, Koni rear shocks, Elite catch can, Solo Performance V6 Mach X-LFX Cat-Back Exhaust, Hex Vents, 1LE strut tower brace, Barton short throw, separate clutch reservoir, American Racing TORQ THRUST M 18X9, HiTS radio with reverse camera, GM Blade Dovetail spoiler, 2010 leather wrap steering wheel, vented engine cover, added Homelink to overhead console.
|
03-06-2014, 03:36 PM | #6 |
BUMBL Z
|
the deck is the only place that i'm hearing rattle from. i was kinda hoping that there would be an easier way to eliminate this since (from what ive read) the only way to get that decklid off for matting is to remove the rear seats and a bunch of other stuff
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
03-06-2014, 04:34 PM | #7 |
Drives: Black 2011 2SS/RS / Black 2013 ZL1 Join Date: Feb 2012
Location: El Paso, Texas
Posts: 314
|
http://www.camaro5.com/forums/showthread.php?t=336873
Try this. I did this myself with some Hushmat and I have no rattle from the rear deck. |
03-07-2014, 09:20 AM | #8 | |
BUMBL Z
|
Quote:
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
03-07-2014, 10:12 AM | #9 |
Drives: Black 2011 2SS/RS / Black 2013 ZL1 Join Date: Feb 2012
Location: El Paso, Texas
Posts: 314
|
No need to dismantle anything. Just gain access to the trunk through the backseat and apply the material on the underside of the rear deck.
|
03-07-2014, 02:47 PM | #10 |
BUMBL Z
|
huh.... ill have to get my hands on some dynamat and try it out.
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|