Anybody removed the stock shift knob? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LDGn63 · 06-04-2009, 04:32 PM

2SS 6m

I twisted mine untill I thought it might break but it didn't budge!
Maybe a set screw under the chrome?
I'm not sure a round knob is gonna look good untill there is an aftermarket boot with a round hole.
Maybe I should just wait for the Hurst...

*radz28* · 06-04-2009, 04:58 PM

Maybe pull the shifter assembly, stick in carefully in a vice, and put channel locks or vice grips on it. Make sure you look for small retainer clips or jamb nuts at it's base too. I've seen both on older Camaros.

0235th · 06-04-2009, 05:05 PM

aww :( i wanted to put an 8 ball on mine.

nUcLeArEnVoY · 06-04-2009, 05:23 PM

The Corvette shifter has a set screw, probably under the ringlet husk. Try pulling down the shift boot to see if it reveals a screw? I dunno.

hiway61revisted · 06-04-2009, 05:25 PM

Quote:

Originally Posted by LDGn63

Maybe I should just wait for the Hurst...

that would be best

Vash · 06-04-2009, 05:26 PM

Or one of those Skulls with the glowing LED's at Autozone lol.

LDGn63 · 06-04-2009, 05:26 PM

Mmmmmm.... VICE grips!

chrisgalles · 06-04-2009, 05:43 PM

Quote:

Originally Posted by Vash

Or one of those Skulls with the glowing LED's at Autozone lol.

That's the only way to go!

Jeffro19 · 06-04-2009, 05:45 PM

Quote:

Originally Posted by Vash

Or one of those Skulls with the glowing LED's at Autozone lol.

LDGn63 · 06-05-2009, 11:15 AM

Quote:

Originally Posted by Vash

Or one of those Skulls with the glowing LED's at Autozone lol.

What color did you get? I wanna get the same!

Ranger 75 · 06-05-2009, 01:12 PM

Nope Like the OEM.

z06invb · 06-05-2009, 01:20 PM

On my C 5 Vette you pop the top cover off the shifter and you see a pin under it. You have to get two screw drivers and work the pin up and out and then the knob comes off.

BlackXIV · 06-05-2009, 01:26 PM

According to GM parts catalog, knob is serviced together with boot and you must remove console plate and 4 bolts or screws to take off knob/boot asm.

pt# 92233397

as far as the knob off the boot.....

06-04-2009, 04:32 PM	#1
LDGn63 Drives: WNABEE Join Date: Jan 2009 Location: DFW Posts: 538 View My Garage	Anybody removed the stock shift knob? 2SS 6m I twisted mine untill I thought it might break but it didn't budge! Maybe a set screw under the chrome? I'm not sure a round knob is gonna look good untill there is an aftermarket boot with a round hole. Maybe I should just wait for the Hurst... __________________ Why oh Why? Windshield=10" vertical mirror= 3 7/8" (that's almost 4") vertical that means that the mirror is 38.75% the size of the vertical windshield... it sure seems like the ratio could be better... just sayin.... our collective MIRROR patch: http://www.camaro5.com/forums/showthread.php?t=24612

06-04-2009, 04:58 PM	#2
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,192 View My Garage	Maybe pull the shifter assembly, stick in carefully in a vice, and put channel locks or vice grips on it. Make sure you look for small retainer clips or jamb nuts at it's base too. I've seen both on older Camaros. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

06-04-2009, 05:05 PM	#3
0235th Lol wut Drives: 2010 Cobalt LS Join Date: Dec 2008 Location: Hattiesburg MS Posts: 152	aww :( i wanted to put an 8 ball on mine. __________________ Current vehicles 2010 Cobalt 2 door 5 speed 2002 Camaro V6 blown engine :(

06-04-2009, 05:26 PM	#7
LDGn63 Drives: WNABEE Join Date: Jan 2009 Location: DFW Posts: 538 View My Garage	Mmmmmm.... VICE grips! __________________ Why oh Why? Windshield=10" vertical mirror= 3 7/8" (that's almost 4") vertical that means that the mirror is 38.75% the size of the vertical windshield... it sure seems like the ratio could be better... just sayin.... our collective MIRROR patch: http://www.camaro5.com/forums/showthread.php?t=24612

06-05-2009, 01:26 PM	#13
BlackXIV FINALLY got my CHL!!!!!! Drives: 03 Avalanche 09 R/T Join Date: Oct 2008 Location: Irving, TX Posts: 174	According to GM parts catalog, knob is serviced together with boot and you must remove console plate and 4 bolts or screws to take off knob/boot asm. pt# 92233397 as far as the knob off the boot..... Last edited by BlackXIV; 06-05-2009 at 02:00 PM.

06-04-2009, 05:23 PM	#4
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	The Corvette shifter has a set screw, probably under the ringlet husk. Try pulling down the shift boot to see if it reveals a screw? I dunno.

06-04-2009, 05:26 PM	#6
Vash Drives: 00 Blazer Join Date: Aug 2008 Location: Texas Posts: 5,104	Or one of those Skulls with the glowing LED's at Autozone lol.

06-05-2009, 01:12 PM	#11
Ranger 75 Drives: 2010 Camaro 2SS IBM Join Date: Apr 2009 Location: Florida Posts: 286	Nope Like the OEM.

06-05-2009, 01:20 PM	#12
z06invb Drives: 2001 Chevy Corvette Z06 Join Date: Mar 2009 Location: Virginia Posts: 138	On my C 5 Vette you pop the top cover off the shifter and you see a pin under it. You have to get two screw drivers and work the pin up and out and then the knob comes off.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Manual shift - 1-4 ?	calflan	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	27	01-19-2015 10:39 PM
Will corvette shift knob fit ?	jdanza	Cosmetics and Lighting Modification Discussions	31	02-14-2012 06:49 PM
Stock 2010 GT500 vs. Magnuson 2SS	garagelogic	Chevy Camaro vs...	191	07-04-2009 09:23 AM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 01:00 PM