10-23-2015, 03:50 PM | #1 |
Front 12v Port
Hi guys, so I never used the 12v Port (Top right of the shifter). I can recall I've used it maybe...4 times and it has worked.
Now it doesn't. I noticed that there is a little circular gold ring missing inside of this port. Because the other port inside the arm rest, has a circular gold ring and it works perfectly. Anyone know if there's a part # I can buy or something I can use to make it work? Remember : It's only a gold little circular ring missing *I'm sure it's what gives the current*. The Gold circular thing is inside the port that is located under the armrest, and works PERFECT. Thanks guys! |
|
10-25-2015, 10:42 AM | #2 |
Drives: 2014 Camaro 2SS / RS Coupe Join Date: Jul 2015
Location: Rochester, NY
Posts: 31
|
Sounds like one of the connectors pulled out. You'll probably have to replace the entire unit unless you figure out what happen to the piece.
|
10-29-2015, 05:43 PM | #3 | |
Quote:
I want to avoid going to my Chevy dealership as much as possible. They are crooks and very unethical. THANKS! |
||
10-29-2015, 07:33 PM | #4 | |
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
Quote:
Here is one site. http://www.cheapestgmparts.com/chevr...e=power-outlet
__________________
Caddy
|
|
10-30-2015, 08:28 PM | #5 | |
Quote:
Going to order and see how it goes. Not quite sure how to install it but should be pretty straight forward. Thanks again! |
||
11-03-2015, 10:44 PM | #6 |
I run 2 catch cans...
|
The socket is in 2 parts. You have to put the ring on the body separately, after attaching under the cover. If you try to mount it to the cover as 1 finished piece you will destroy it.
__________________
Overkill tuned • Air Scoop • CAI • VMAX PTB • JacFab Laminator FX + Extendolator • SOLO Hi-Flo Cats + Cat-Back Exhaust
View my top 3 LFX performance mods and more: . |
|
|
|
|