FrankensteinED Heads??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mparkz · 07-14-2018, 05:17 PM

As the title says. Looking for some reviews. I’m currently at about 500rwhp/500tq on 12 pounds. Looking to install a nice custom Btr PD cam so figured I’d do the heads while Im at it. Open to suggestions on a better alternative as well for the heads. What do you guys think?

blake-b · 07-14-2018, 05:43 PM

I have a set of Stage 1 LSx LS7 heads that flow 390cfm @ .700 intake if I recall correctly. My cam is 702 in/689 exh or something like that so they work well. When Chris Frank first got started, you could call and he'd answer and talk to you as long as needed.

I highly recommend them.

Mparkz · 07-14-2018, 06:04 PM

Quote:

Originally Posted by blake-b

I have a set of Stage 1 LSx LS7 heads that flow 390cfm @ .700 intake if I recall correctly. My cam is 702 in/689 exh or something like that so they work well. When Chris Frank first got started, you could call and he'd answer and talk to you as long as needed.

I highly recommend them.

Thanks for the reply! Do you recall what kind of power gain they produced?

blake-b · 07-14-2018, 06:19 PM

Not sure as they were added to a new engine and I don't have a reference point to work from. I have twins and make just over 1000whp with 13.6# with them. Boost is a measure of restriction so that shows, as part of the overall combination, they flow very well.

*SSE 4 2SS* · 07-14-2018, 11:56 PM

Quote:

Originally Posted by blake-b

Not sure as they were added to a new engine and I don't have a reference point to work from. I have twins and make just over 1000whp with 13.6# with them. Boost is a measure of restriction so that shows, as part of the overall combination, they flow very well.

I was fixing to state, 1K at 13.6 is amazing... heck yeah...

I run the AllPro LSW12-4 heads...

mrimpala02 · 07-15-2018, 12:53 AM

Quote:

Originally Posted by blake-b

Not sure as they were added to a new engine and I don't have a reference point to work from. I have twins and make just over 1000whp with 13.6# with them. Boost is a measure of restriction so that shows, as part of the overall combination, they flow very well.

Makes me feel pretty good about my SBE w/stock non ported heads making 900 rwhp on 14 psi.

07-14-2018, 05:17 PM	#1
Mparkz Drives: 2010 2SS 55k Join Date: Aug 2015 Location: California Posts: 38	FrankensteinED Heads??? As the title says. Looking for some reviews. I’m currently at about 500rwhp/500tq on 12 pounds. Looking to install a nice custom Btr PD cam so figured I’d do the heads while Im at it. Open to suggestions on a better alternative as well for the heads. What do you guys think? __________________ '10 2SS: SLP TVS2300, 3.4 JRE Pulley, ARH 1 7/8 LTs, Loudmouth I w/ res del muffler del & mf xpipe, SLP BlackWing CAI, NW102, Zl1 Fuel Pump, Alky Meth Single Nozzle, FIC 1000s, 3200 circle D, making around 500whp ( Frankenstein heads&cam coming soon... )

07-14-2018, 05:43 PM	#2
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	I have a set of Stage 1 LSx LS7 heads that flow 390cfm @ .700 intake if I recall correctly. My cam is 702 in/689 exh or something like that so they work well. When Chris Frank first got started, you could call and he'd answer and talk to you as long as needed. I highly recommend them.

07-14-2018, 06:19 PM	#4
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	Not sure as they were added to a new engine and I don't have a reference point to work from. I have twins and make just over 1000whp with 13.6# with them. Boost is a measure of restriction so that shows, as part of the overall combination, they flow very well.