Nitrous electrical problem. Plz help. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sdvolcom · 03-01-2016, 11:57 AM

Ok everybody. I am in desperate need of help. I have a NOS system with NX solenoids. The relay for the solenoids came with a 20 amp fuse. Originally we hooked up the power to a 10 amp fuse and we kept blowing fuses so then we put the power straight to the positive battery and we were still blowing fuses so whenever I try to do a test pass pop there goes another fuse. So if you guys could help me out and give me some advice I would really appreciate it

hazy · 03-01-2016, 03:22 PM

I can't say that this will be the same, but I had an issue on my last motorcycle where I kept blowing a particular fuse. Turns out I had a hot wire that was grounding out and blowing the fuse. So, to that end, I'd say check ALL of your wiring to make sure none of it is exposed/touching/arcing

03-01-2016, 11:57 AM	#1
Sdvolcom Drives: 2010 5th gen camaro 2ss LS3 Join Date: Sep 2015 Location: Southern California Posts: 41	Nitrous electrical problem. Plz help. Ok everybody. I am in desperate need of help. I have a NOS system with NX solenoids. The relay for the solenoids came with a 20 amp fuse. Originally we hooked up the power to a 10 amp fuse and we kept blowing fuses so then we put the power straight to the positive battery and we were still blowing fuses so whenever I try to do a test pass pop there goes another fuse. So if you guys could help me out and give me some advice I would really appreciate it

03-01-2016, 03:22 PM	#2
hazy Drives: 2011 2SS/RS Join Date: Feb 2014 Location: H-Town Posts: 1,037	I can't say that this will be the same, but I had an issue on my last motorcycle where I kept blowing a particular fuse. Turns out I had a hot wire that was grounding out and blowing the fuse. So, to that end, I'd say check ALL of your wiring to make sure none of it is exposed/touching/arcing