Finally

[ariZona28]

Had to remove the wheel and liner to get at the back side of the crash bar. I was pretty nervous at first but once I got started it was no big deal.

[HoodCheck]

Originally Posted by ariZona28

Had to remove the wheel and liner to get at the back side of the crash bar. I was pretty nervous at first but once I got started it was no big deal.

Thanks brotha!

[Coz3z3]

Yeah, I put off the long guards until after the weekend. And as far as the tow hook, it seems pretty simple. It’s just the crash bar. But I went the other route with buying a new lightweight one with it integrated. Also able to save my original in new condition just incase (like Arizona says) lol

[Cvargz4589]

Originally Posted by Coz3z3

Yeah, I put off the long guards until after the weekend. And as far as the tow hook, it seems pretty simple. It’s just the crash bar. But I went the other route with buying a new lightweight one with it integrated. Also able to save my original in new condition just incase (like Arizona says) lol

I thought about going that route too. Where did you find a lightweight crash bar with the integrated tow hook?

[Coz3z3]

LeftCoast32. Fit flawlessly. They are on this forum too under same name. Was selling that sweet built black Z a couple months ago with the full cage and everything. Good people to work with. Will be purchasing their rear bar sometime this year too

[Cvargz4589]

Originally Posted by Coz3z3

LeftCoast32. Fit flawlessly. They are on this forum too under same name. Was selling that sweet built black Z a couple months ago with the full cage and everything. Good people to work with. Will be purchasing their rear bar sometime this year too

Ok. I checked out their site & doesn’t look like they make those anymore? Unless I’m missing them somehow!

[CAMARO_HEAVEN]

Originally Posted by Cvargz4589

Ok. I checked out their site & doesn’t look like they make those anymore? Unless I’m missing them somehow!

Here's the link to the front ones he's sold out of them right now.

https://www.leftcoast32.com/shop-per...point-receiver

Here's the link to the rear ones he only has the mild steel ones right now.

https://www.leftcoast32.com/shop-per...point-receiver

I bought his last set of of chromoly ones he'd had. Don't think he is planning on making any more.

I could be persuaded to sell mine seeing as I sold my Z28 Last Month.
They are still brand new in the box from Joe.

[Cvargz4589]

Originally Posted by CAMARO_HEAVEN

Here's the link to the front ones he's sold out of them right now.

https://www.leftcoast32.com/shop-per...point-receiver

Here's the link to the rear ones he only has the mild steel ones right now.

https://www.leftcoast32.com/shop-per...point-receiver

I bought his last set of of chromoly ones he'd had. Don't think he is planning on making any more.

I could be persuaded to sell mine seeing as I sold my Z28 Last Month.
They are still brand new in the box from Joe.

Ok cool, pm sent!

[Coz3z3]

This week I worked on adding my new Coolshirt cooler. I had originally been thinking to put it in the back seat so it’s close and shouldn’t be hard with my rear seat delete. After I got it, I was mocking up where I was going to actually put it and on the rear seat delete was not looking good. There was too much of an angle. I probably wouldn’t be able to put but a quart if water into it since it was so angled. I thought about making a bracket to get it to sit flush. Ended up looking at the trunk and decided that was probably the place. I have the flow control switch with it but couldn’t find a good place to mount it that I also liked. So I rigged a toggle to the seat for now. I haven’t seen many people use these things, so does nobody else get hot??? Lol

[Coz3z3]

Put rivnuts in the battery cover, then mounted with bolts

[d kings z28]

I have the same car in a2014, ARH’s &cats stage 3 cam Lingenfelter ported heads &a little more 540hp mustang Dino we are Lucky to have these cars will be the same as 69’s Soon !