06-25-2013, 08:01 PM | #15 |
Drives: 2011 Camaro SS Join Date: Sep 2012
Location: Quincy.Ma
Posts: 202
|
Aeromotive has had problem pumps forever. It will be blamed on too small of wire, voltage ect but in the end there pumps are junk. Not made for street cars.
This has been going on for atleast the 10 years I've been into these cars.
__________________
2010 SS, 230 Cam, ARH headers,Airaid intake, 160 t-stat,3.90 gears 475hp/430tq. -old setup
added- Procharger F1-D, alky control,FIC 96lb,fuel system- 810hp/735tq- 10.3 at 136mph , 1.75 60'. see how long it lasts. Thanks to Slowhawk Performance. 2008 C6, 427ci,YSI,mcleod clutch,Alky control, built tranny, custom fuel system. 985rwhp, best 1/4 -9.4 at 152mph. still trying to get the shifting down:( |
06-27-2013, 09:00 AM | #16 | |
Quote:
Everything has to be installed very precisely and use the proper supplemental parts to make their systems work. Its not just as simple as drop it in, power ground, and you're off. Their pumps are not junk, their products and engineering is not junk...If it was they would not be around. We have used these systems in over 12-15 applications in Camaros alone (we have used lots in corvettes as well and other applications) making all north of 800 horsepower up to 1400...No vapor lock, no dead pumps, no problems. No Voltage problems. There are many options in the market for fueling high output engines, some are better then others, work with a trusted proven shop and I am certain you can find a proper solution for the application. |
||
06-27-2013, 10:44 AM | #17 |
Drives: Four Door Camaro Join Date: Apr 2010
Location: SE WI
Posts: 189
|
Many sponsors on the board here carry the Squash fuel system for the Camaro. We have no issues daily driving, drag racing, road racing, etc with it. I guarantee you would be happy with it...
Andy
__________________
Squash Performance LLC
2010+ Camaro 800 LPH fuel systems |
06-29-2013, 01:41 PM | #18 |
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
Did you get it figured out? good controller makes the Aeromotive pumps work just fine. Dave Steck builds one that works.
|
06-29-2013, 01:44 PM | #19 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
I have one on order and it should arrive next week. My car is stuck in Vegas because it is not drivable. Its getting shipped on Monday and should be back to me on Tuesday. I really hope my car is running this weekend!
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
06-30-2013, 05:15 PM | #20 |
Drives: 2010 Camaro 2SS Join Date: Jul 2012
Location: Olathe, ks
Posts: 203
|
They should have a solution for that problem. I USE to run the eliminator, them the upgraded to the pro pump. I'm local to aeromitive and took the car to there facility so they could test out some of the issues they were having. I was burning up pumps in a matter of days. They finly came up with a solution to the voltage problem and the burning up of pumps issue. By that time I was burnt on them and went with the squash. And since then put a fuel cell in the trunk. Dont recommend doing the fuel cell, I'm in the process of putting stock tank back in and running the squash setup again. Give Andy a call he will treat u right and his setup is great!
|
07-04-2013, 11:52 AM | #21 |
I bought the fuel cell with elim pump built in ,,,,,, well nothing but problems and sent pump back 3 times and never fixed the problem . this was a 700 dollar piece of crap ! take a loss and step up to a better pump I bought a Weldon pump !
|
|
07-12-2013, 01:51 PM | #22 |
Drives: 96SS Join Date: May 2009
Location: New Castle Delaware
Posts: 1,948
|
We are having a similar problem. Car will start and run fine after i flash it and some times for weeks on end... Then all of the sudden will fire up then die... Let it sit for 20-30 mins and it will fire up and run perfect... Same issues you guys were having?
|
|
|
Thread Tools | |
|
|