09-16-2018, 07:59 PM | #1 |
Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
Swapping out rear wheel stud
Does anyone know if I could just take off the wheel and bang it out and put the new one in or is it more complicated than that?
Thanks |
09-16-2018, 08:52 PM | #2 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
That's it - not more complicated
|
09-17-2018, 11:19 AM | #3 |
Drives: 2012 Camaro 2SS Ls3 Cammed/Blown Join Date: Feb 2016
Location: Los Angeles Ca
Posts: 267
|
Would I be able to hit the old stripped one out with an extension and hammer while the wheel is still on?
|
09-17-2018, 07:21 PM | #4 |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
Spike III Build 2011 IBM 1SS/RS [COTW 6/25/12]
No you can't. You have to take the wheel off the caliper,the rotor. This is for the front wheel the rear wheel is a whole other thing.
__________________
|
|
|
|
|