09-29-2009, 11:12 AM | #1 |
C-MARO
Drives: 2010 1SS/RS SW M6 & 2000 Z28 Join Date: May 2009
Location: S.A.,TX
Posts: 45
|
calipers
does anyone know if its possible to remove the chevy and brembo logos on the stock SS calipers, and if so how would you go about doing so?
thanks for any info. |
09-29-2009, 01:49 PM | #2 |
Drives: 2SS/RJT/A6/Received 09/09/09 Join Date: Jun 2009
Location: Frederick County, VA
Posts: 598
|
Why would you want to do that?
Paint them black. |
09-29-2009, 02:01 PM | #3 |
Drives: Camaro SS/RS Join Date: May 2009
Location: Austin TX,
Posts: 475
|
Its paint, just use a scrach pad, but be careful not to remove black from the caliper.
__________________
Camaro SS/RS Corsa Catback
|
09-29-2009, 03:15 PM | #4 |
C-MARO
Drives: 2010 1SS/RS SW M6 & 2000 Z28 Join Date: May 2009
Location: S.A.,TX
Posts: 45
|
I want to replace the logos with brembo decals and still keep the stock color of the calipers
|
09-29-2009, 04:20 PM | #5 |
You will have to sand then refinish, or use air craft remover.
Regaurds |
|
09-30-2009, 07:41 PM | #6 |
Drives: Camaro SS/RS Join Date: May 2009
Location: Austin TX,
Posts: 475
|
O thats going to be hard. good luck!
__________________
Camaro SS/RS Corsa Catback
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wheel weights on my Camaro's calipers | SNOOK | Suspension / Brakes / Chassis | 680 | 09-19-2013 02:37 PM |
Optional Brembo Calipers | Rallyman6 | Wheels and Tires Talk Sponsored by The Tire Rack | 35 | 12-31-2011 06:41 PM |
POR-15 for brake calipers? | navyflyer72 | Wheels and Tires Talk Sponsored by The Tire Rack | 1 | 06-24-2009 02:46 PM |
Painting the Brembo calipers | mondain | Wheels and Tires Talk Sponsored by The Tire Rack | 7 | 04-13-2009 11:57 PM |
Glossy Black Calipers | ChevyBoiSS | Wheels and Tires Talk Sponsored by The Tire Rack | 7 | 02-17-2009 09:05 AM |