11-06-2021, 10:30 AM | #1 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 40
|
Question on headers
I am looking for a set of headers that will mate up to the stock exhaust. Is kooks really the only option? I have a livernois exhaust (corsa 2.5”) that I will be adding at the same time.
Thank you 2011 Camaro SS L99 |
11-06-2021, 10:38 AM | #2 |
Drives: 2012 SS Join Date: Feb 2016
Location: Lubbock Texas
Posts: 121
|
My stainless works mated up to my factory system perfectly. But I have an ls3 & I am not sure of any differences.
__________________
2012 2SS/RS 6speed, Howards asa cam on 113lsa Stainless works LT's, NPP exhaust, Z28 Cai, 3.91 gears. Tuned by Blue Thunder 2 racing Lubbock Texas.
|
11-06-2021, 10:59 AM | #3 |
Drives: Chevy Silverado Join Date: Jul 2020
Location: Helena, MT
Posts: 40
|
Speed engineering mated up with my stock system just fine. If getting rid of the cats you just have to make sure you get slip on style fittings.
|
11-06-2021, 06:33 PM | #4 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 40
|
Thanks everyone
|
11-06-2021, 09:17 PM | #5 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,576
|
My TSP long tubes connected to the stock exhaust. The off-road pipes are 3 inch on one side for the collectors and 2.5 on the other end that connects to the stock mid pipes
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
11-07-2021, 01:17 AM | #6 |
It don’t come easy.
|
Stainless Power with HFC connected right up to my Corsa 2.5.
__________________
|
11-07-2021, 05:47 AM | #7 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 40
|
|
11-07-2021, 07:01 AM | #8 |
Started#gottalovethatblue
|
Here's the forum favorites:
Higher priced: Kooks, ARH, Stainless Works Mid priced: OBX, Texas Speed, Stainless Power Budget: Speed Engineering Happy modding!
__________________
|
11-07-2021, 09:28 AM | #9 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,449
|
My Stainless Power bolted right up. Now I have a Corsa catback on there.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
|
|