RST Polyurethane Transmission Mount @ Phastek Performance - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sales@Phastek · 11-08-2018, 11:04 AM

Now Available!

FREE Shipping @ Phastek Performance

Race Sport Technology (RST) has come out with a solution that will take care of movement caused by the soft factory rubber transmission mount. The polyurethane used in their design can hold its shape better than rubber with less flexing of the material, which means more energy can be delivered to the rear wheels. This allows for harder launches and helps maintain the proper pinion angle with less transmission movement.

Fits 2010-2015 Camaro SS & ZL1 with Manual Transmission

Installation is done by simply removing the factory mount and installing the polyurethane mount. You will need to support the transmission with transmission jack or something equivalent, then you can remove the factory transmission brace allowing access to the factory rubber mount. Then you can simply unbolt the factory mount and replace with the RST Polyurethane mount using the factory bolts. Then you can reinstall the factory transmission brace in reverse order as removed.

Features:

Direct bolt-in
No modification required
Less driveline movement
Constructed out of Polyurethane
Enables harder launches
Made in the USA

RST - 5PTM

Dylan1214 · 11-09-2018, 01:05 AM

Why no auto :(

11-08-2018, 11:04 AM	#1
Sales@Phastek Drives: 2016 1SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,817	RST Polyurethane Transmission Mount @ Phastek Performance Now Available! FREE Shipping @ Phastek Performance Race Sport Technology (RST) has come out with a solution that will take care of movement caused by the soft factory rubber transmission mount. The polyurethane used in their design can hold its shape better than rubber with less flexing of the material, which means more energy can be delivered to the rear wheels. This allows for harder launches and helps maintain the proper pinion angle with less transmission movement. Fits 2010-2015 Camaro SS & ZL1 with Manual Transmission Installation is done by simply removing the factory mount and installing the polyurethane mount. You will need to support the transmission with transmission jack or something equivalent, then you can remove the factory transmission brace allowing access to the factory rubber mount. Then you can simply unbolt the factory mount and replace with the RST Polyurethane mount using the factory bolts. Then you can reinstall the factory transmission brace in reverse order as removed. Features: Direct bolt-in No modification required Less driveline movement Constructed out of Polyurethane Enables harder launches Made in the USA RST - 5PTM __________________

11-09-2018, 01:05 AM	#2
Dylan1214 Drives: 2014 Camaro SS L99 Join Date: Nov 2017 Location: GrandRapids,Michigan Posts: 225 View My Garage	Why no auto :(