08-31-2012, 11:25 PM | #1 |
Drives: 2012 ZL1 Camaro Join Date: May 2012
Location: PA
Posts: 181
|
Not to happy with my first drag strip day! :(
Went to Maple Grove tonight and ran a best pass of 12.85 at 111 with the TC on. Any other mode it just smoked the tires. Hit second on one pass with everything turned off and almost stuck it in the wall. Not to happy with how easy these tires break loose. Aired them down to 25 psi and still broke crazy loose.
The temp according to the car was between 88 and 91. I'm pretty sure there was a lot of timing being pulled out. My buddy ran a 12.90 with his lightly modified SS with stock tires. He spun way less than me. I was only leaving between 1500 and 2000 RPMs. Looks like I need a set a drag radials. My car is a manual.
__________________
|
08-31-2012, 11:29 PM | #2 |
Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012
Location: Artesia, NM
Posts: 171
|
Practice, practice and more practice...lower air pressure a little more. Idk what the density altitude was but with air temps between 88-91 im sure that hurt as well. What was your 60'?
|
08-31-2012, 11:41 PM | #3 |
Drives: 2012 ZL1 Camaro Join Date: May 2012
Location: PA
Posts: 181
|
Horrible, a 2.16 Just spins. Practice makes perfect.
__________________
|
08-31-2012, 11:42 PM | #4 |
Catch me if you can
|
Stock tires need a lot of heat to get them sticky, but even then they are less than ideal.
You're right, you need a set of DR tires. You'll see your 60' and time decrease a bunch.
__________________
|
08-31-2012, 11:55 PM | #5 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
Definately get some drag radials.
And secondly, if you're going to use the stock tires, lower the psi to 17 in them, see if that doesn't help out. |
08-31-2012, 11:58 PM | #6 |
Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012
Location: Artesia, NM
Posts: 171
|
Drop your 60' down to the 1.8x range and you'll see your time drop about .4-.5 minimum
|
08-31-2012, 11:59 PM | #7 |
Drives: 2012 ZL1 Camaro Join Date: May 2012
Location: PA
Posts: 181
|
I'll have to try the low pressure first. DR aren't the cheapest thing for how little I am going to race the car, and air is free.
__________________
|
09-01-2012, 12:13 AM | #8 |
YOOZ GOTA B FREKN KIDN ME
|
Is it safe to run over 100mph at the end of the drag strip with just 17psi in the tires? I've never ran at a drag strip so thought I'd ask for some experienced info.
__________________
The Zeldabeast! A True Road Warrior!
2018 Dodge Challenger Hellcat WideBody 6MT 2013 ZL1 Camaro 6MT 2015 GMC Sierra 1500 SLT 6.2 L86 Crew Cab 2012 Aprilia RSV4 R 2015 Husqvarna FC450 Motomadness First Car: 1973 Dodge Charger 340 Magnum 4MT Factory Hurst Pistol Grip Shifter |
09-01-2012, 12:16 AM | #9 |
Drives: 2012 ZL1 #450 Join Date: Nov 2011
Location: Big Spring, TX
Posts: 479
|
Yes, it is safe.
|
09-01-2012, 12:21 AM | #10 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
an other guy on here set his pressure to 18 psi
|
09-01-2012, 12:24 AM | #11 |
Banned
|
|
09-01-2012, 04:40 AM | #12 |
Drives: 2013 ZL1 # 2195 Join Date: Jun 2009
Location: Bradenton, FL
Posts: 965
|
You just need slicks!
__________________
|
09-01-2012, 08:06 AM | #13 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
Make sure you get a proper burnout without water(stock tires)!
|
09-01-2012, 08:32 AM | #14 |
|
if you're going to drag it, why not invest in proper tires?
|
|
|
|
|