Corsa installed with pics - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mod007 · 07-01-2009, 09:46 AM

I got my Corsa Catback in the mail last night at 7:30pm and had them installed by 9:00pm. Installation was so easy a child could do it! Okay pros and cons. The 4” tips look amazing and you don’t have those ugly mufflers hanging down anymore. The instructions were great and quality is topnotch. The exhaust roars at start up and at WOT but is just a little louder then stock at cursing speed.

I went to the dealer today and all the service techs came out to see what I did to the car, they said they could tell it wasn’t stock when I pulled up. I am very please with this catback and I can’t wait to get my LT headers on. Got to say Thanks to LMR for hooking me up they shipped them on Monday and I had them by Tuesday!

*radz28* · 07-01-2009, 09:48 AM

SWEET!!! Can you get some pics' from under the car too?

jpsuperman81 · 07-01-2009, 09:52 AM

Just curious which long tubes you went with? I got the full ARH long tube x pipe and exhuast setup and i am hoping corsa makes a axle back system or i can grab two mufflers because if not i will be wasting exhaust piping.

GMtothecore · 07-01-2009, 09:55 AM

cool, which mufflers did you get?

SGOS252382 · 07-01-2009, 11:04 AM

Looks great
And wait until you get those long tubes are your car. It will be plenty aggressive after that.

Rogue Leader · 07-01-2009, 11:34 AM

Just curious I know you have to remove the bottom rear fascia to get the mufflers off, how was that? I am afraid of damaging my bumper removing it.

fldrummer · 07-01-2009, 11:39 AM

Is it me, or do the tips stick out about an inch too far?... You must have gotten some of their quieter mufflers. Can anyone confirm if they're going to have an "Xtreme" setup, like the Corvette systems?

Mod007 · 07-01-2009, 11:55 AM

I’m going with Kooks 1 7/8” X 3”. Here’s some pics from under the car, also they do stick out a little more.
Has anyone noticed that the factory pipe's are pinched down in three places almost a ¼ in?

I forgot to tell you guys I weight the factory catback and there about 70lbs.
I didn’t get to weight the Corsa the shipping box has 40lbs on the post office sticker but it felt more like 50lbs to me.

Mod007 · 07-01-2009, 12:33 PM

Quote:

Originally Posted by Rogue Leader

Just curious I know you have to remove the bottom rear fascia to get the mufflers off, how was that? I am afraid of damaging my bumper removing it.

No, when your taking off your catback you just have to push mufflers back about 2" so you can drop the front of the pipe's and then just push the mufflers forward and down. Too easy.

tones2SS · 07-01-2009, 12:42 PM

Very nice MOD007! I bet it sounds killer.
Corsa makes a nice cat back system. That car should roar with the KOOKS headers. Please post a video when complete! I am eager to hear it with the Kooks & Corsa together in sweet "harmony".

Croathlete · 07-01-2009, 12:45 PM

Do you have a manual or auto? Still wondering what some of these exhausts will sounds like when AFM kicks in...

*radz28* · 07-01-2009, 02:32 PM

Looks like this is a stick because it almost looks like there are the little resonators in one of the pics' of the H-pipe where that big 'ole pontoon of a L99 resonator would go. I couldn't say for sure though.

slowerthanu · 07-01-2009, 03:29 PM

I'm really liking the looks and sound of the Corsa system. I really like the tips too.

dreammy · 07-01-2009, 03:49 PM

Ok...really impressive...but i NEED TO HEAR the rumble to really be impressed!!!! Can you provide?

07-01-2009, 09:46 AM	#1
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	Corsa installed with pics I got my Corsa Catback in the mail last night at 7:30pm and had them installed by 9:00pm. Installation was so easy a child could do it! Okay pros and cons. The 4” tips look amazing and you don’t have those ugly mufflers hanging down anymore. The instructions were great and quality is topnotch. The exhaust roars at start up and at WOT but is just a little louder then stock at cursing speed. I went to the dealer today and all the service techs came out to see what I did to the car, they said they could tell it wasn’t stock when I pulled up. I am very please with this catback and I can’t wait to get my LT headers on. Got to say Thanks to LMR for hooking me up they shipped them on Monday and I had them by Tuesday! Attached Images __________________ Camaro SS/RS Corsa Catback Last edited by Mod007; 07-03-2009 at 11:43 AM.

07-01-2009, 09:48 AM	#2
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,179 View My Garage	SWEET!!! Can you get some pics' from under the car too? __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

07-01-2009, 09:55 AM	#4
GMtothecore "That Guy" Drives: Camaro SS...........what else? Join Date: Apr 2009 Location: OOOOOOOklahoma where the wind comes sweepin' down the plains. Posts: 2,360	cool, which mufflers did you get? __________________

07-01-2009, 11:34 AM	#6
Rogue Leader Iatefiberglassinsulation Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: Long Island Posts: 3,601 View My Garage	Just curious I know you have to remove the bottom rear fascia to get the mufflers off, how was that? I am afraid of damaging my bumper removing it. __________________ 2010 Chevrolet Camaro SS - was daily driver, now toy 2020 Alfa Romeo Giulia Quadrifoglio - Daily Driver 2017 Mercedes Benz GLE 350 - Wifes Car 2008 Chevy Silverado 2500 HD LT 6.0 - Tow Vehicle 1991 Alfa Romeo 164S - Project Car 1994 Volkswagen Golf - Race Car "Like" my race team on Facebook: http://www.facebook.com/farfrumwinnin

07-01-2009, 11:55 AM	#8
Mod007 Drives: Camaro SS/RS Join Date: May 2009 Location: Austin TX, Posts: 475	more pics I’m going with Kooks 1 7/8” X 3”. Here’s some pics from under the car, also they do stick out a little more. Has anyone noticed that the factory pipe's are pinched down in three places almost a ¼ in? I forgot to tell you guys I weight the factory catback and there about 70lbs. I didn’t get to weight the Corsa the shipping box has 40lbs on the post office sticker but it felt more like 50lbs to me. Attached Images __________________ Camaro SS/RS Corsa Catback Last edited by Mod007; 07-01-2009 at 12:07 PM.

07-01-2009, 09:52 AM	#3
jpsuperman81 Yep I'm back! Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009 Location: Indian Trail, NC Posts: 2,565 View My Garage	Just curious which long tubes you went with? I got the full ARH long tube x pipe and exhuast setup and i am hoping corsa makes a axle back system or i can grab two mufflers because if not i will be wasting exhaust piping.

07-01-2009, 11:04 AM	#5
SGOS252382 Drives: 2010 Camaro 2SS/RS Join Date: Mar 2008 Location: S.W. Florida Posts: 6,294	Looks great And wait until you get those long tubes are your car. It will be plenty aggressive after that.

07-01-2009, 11:39 AM	#7
fldrummer "Black Ace" Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008 Location: Ft. Lauderdale, FL Posts: 1,352	Is it me, or do the tips stick out about an inch too far?... You must have gotten some of their quieter mufflers. Can anyone confirm if they're going to have an "Xtreme" setup, like the Corvette systems?

07-01-2009, 12:42 PM	#10
tones2SS Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009 Location: Massachusetts Posts: 3,100	Very nice MOD007! I bet it sounds killer. Corsa makes a nice cat back system. That car should roar with the KOOKS headers. Please post a video when complete! I am eager to hear it with the Kooks & Corsa together in sweet "harmony".

07-01-2009, 12:45 PM	#11
Croathlete Danny Drives: 2010 Camaro 2SS/RS Join Date: Nov 2007 Location: NYC Posts: 1,656	Do you have a manual or auto? Still wondering what some of these exhausts will sounds like when AFM kicks in... __________________ 2SS/RS CGM with black rally stripes DON_RAFA describing my Noweeds cutouts - "Very Strong. When I couldn't see you I still heard you. Sounds like your car is pissed at the world."

07-01-2009, 02:32 PM	#12
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,179 View My Garage	Looks like this is a stick because it almost looks like there are the little resonators in one of the pics' of the H-pipe where that big 'ole pontoon of a L99 resonator would go. I couldn't say for sure though. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

07-01-2009, 03:29 PM	#13
slowerthanu Drives: 2ss on order, 06 f-150 Join Date: Jun 2009 Location: Utah Posts: 42	I'm really liking the looks and sound of the Corsa system. I really like the tips too.

07-01-2009, 03:49 PM	#14
dreammy Banned Drives: 2010 2LT IOM RS Join Date: Jun 2009 Location: Big Lake Minnesota Posts: 441 View My Garage	Ok...really impressive...but i NEED TO HEAR the rumble to really be impressed!!!! Can you provide?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
More pics from Barrett-Jackson auction in West Palm beach FL	vladkgb	Camaro Photos \| Spyshots \| Video \| Media Gallery	3	04-12-2009 07:13 PM