01-19-2020, 09:47 PM | #1 |
Exhaust question
Hi All,
I have a 2014 2LT RS. I installed axle back exhaust. Simply cut exhaust pipes slid over the new system and clamped. Now after two years looking to put back stock OEM mufflers. Anyone know what coupler I will need to use so as to fit over each end of my cut? Thanks! |
|
01-20-2020, 09:55 AM | #2 |
Drives: 2015 blk 1 SS Join Date: May 2012
Location: Coventry RI
Posts: 1,309
|
Use a band clamp,available at any parts store, probably 2.5 inch
__________________
15 1 SS
|
01-21-2020, 06:32 AM | #3 |
V6 exhaust
I found out the exhaust down at the muffler area is 2 1/4” pipe. I needed a 2 1/4ID and OD coupler to rejoin the stock muffler to the exhaust pipe. Will weld both ends. Thanks
|
|
01-27-2020, 06:45 PM | #4 |
Drives: 2010 Camaro LT Join Date: Mar 2017
Location: California
Posts: 25
|
Can I just ask why u went back to stock?
|
|
|
|
|