11-12-2020, 09:57 AM | #1 |
Drives: 2010 Camaro SS, 2013 Cadillac CTS V Join Date: May 2020
Location: Brevard, Florida
Posts: 55
|
Build Thread for my 2010 SS | Added Supercharger
This is my 2010 SS Build. Bought a Jokerz Ported Blower about 2 months ago. Had to wait to do first oil change on the new motor before installing it, just to make sure there were no issues first. So far so good on the motor! (other than needing a fresh tune, which I decided to wait until after the blower was installed) We started the blower, but have not completely finished it. Link to video is here if your interested. It went well. It's a TIGHT freakin' fit dude. Like damn. Talk about crammed spaces. The supercharger kit I ordered didn't come with intake, so you won't see that in video...apparently because I didn't buy the supercharger from them, I only bought the kit, it didn't come with intake, which we didn't notice until we finally got around to install. Either way one is ordered and on the way. Thanks for watching if you did. Hopefully finishing up the heat exchanger this week, and the last few minor finishing touches and taking it to Cal Hartline to tune. Can't wait to hear the new pur.
http://https://youtu.be/YttkLlCxVTU |
11-12-2020, 05:37 PM | #2 |
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,012
|
Put this in the forced induction section!
|
11-12-2020, 06:50 PM | #3 |
Drives: 2010 1SS Join Date: Aug 2015
Location: Bayville, NJ
Posts: 936
|
Would love to see the video but it is not linking right... getting error?
__________________
2010 1SS LS3, Black, 235/250, .621/.615, 114 + 4, Kooks Stepped Headers, 3.91's, Bo White PTB, Flowmaster Mufflers, Cold Air Industries CAI, Apex Scoop & Windshield Washer Relocate, SLP Wheels, Skip Shift Eliminate, Barton Flat Stick, OEM HID/Halos, Dyno Tuned by ECS
|
11-12-2020, 07:55 PM | #4 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
Ah, been there...
Exciting! -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
11-13-2020, 05:55 AM | #5 | |
waiting at the tree
Drives: SIM 2010 2SS/RS A6 Join Date: Apr 2013
Location: Niagara Falls
Posts: 3,132
|
Quote:
Was the crank pinned on the rebuild?
__________________
2010 2SS/RS A6 ZL1 Rims
60ft 2.03 13.08 at 107.82 (4/28) 2009 Pontiac G8 3.6L the DD |
|
11-13-2020, 06:23 AM | #6 |
Drives: 2010 1SS Join Date: Aug 2015
Location: Bayville, NJ
Posts: 936
|
__________________
2010 1SS LS3, Black, 235/250, .621/.615, 114 + 4, Kooks Stepped Headers, 3.91's, Bo White PTB, Flowmaster Mufflers, Cold Air Industries CAI, Apex Scoop & Windshield Washer Relocate, SLP Wheels, Skip Shift Eliminate, Barton Flat Stick, OEM HID/Halos, Dyno Tuned by ECS
|
12-18-2020, 12:48 AM | #7 |
Drives: 2010 Camaro SS, 2013 Cadillac CTS V Join Date: May 2020
Location: Brevard, Florida
Posts: 55
|
|
12-18-2020, 09:08 AM | #8 |
Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,634
|
Nice! It may happen if a mod sees it but you should ask for your build thread to be moved to the member journals sub-forum, thats where we all post our build threads. Looks like yours is coming along nicely! I wonder what you can do at the track.
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
12-18-2020, 09:14 AM | #9 | |
Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
|
BLU DUCE AKA=Spike III Build
Quote:
Good luck with the Build.
__________________
|
|
12-18-2020, 09:30 AM | #10 |
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
Looking good. Nice build going on.
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
|
|
|
|