Headers with stock catback - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

o2camaross · 08-23-2009, 08:16 PM

I just got a set of sw headers and I'm looking to install them and use the existing factory 2.5" system. What do I need to do this, to go from the collectors to the stock exhaust?

tbyrne · 08-24-2009, 09:05 AM

The Stainless Works headers were available as headers by themselves or packages with cats or offroads to mate up to their exhaust. When I spoke with them last week, I was told that they are now producing transition tubes to alllow their headers to mate up to the factory exhaust. So you can go with the headers and those tubes (http://estore.websitepros.com/208190...il.bok?no=1174) but you won't have any rear 02 bungs and will need to have the computer programmed. If you already have the headers, the tubes alone are supposed to be $75.00.

Hope this helps!
Tom

o2camaross · 08-24-2009, 12:45 PM

Yes Tom that's exactly what I was looking for.

o2camaross · 08-24-2009, 12:46 PM

Can u get them for me?

o2camaross · 08-24-2009, 08:52 PM

or do i have to go through stainless works?

08-23-2009, 08:16 PM	#1
o2camaross Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008 Location: Driving Posts: 362	Headers with stock catback I just got a set of sw headers and I'm looking to install them and use the existing factory 2.5" system. What do I need to do this, to go from the collectors to the stock exhaust?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RATING HEADERS???	SAUCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	20	12-02-2011 08:21 PM
Doug Thorley Shorty Headers for 2010 Camaro Installed -WOW!	Rallyman6	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	64	03-13-2011 12:36 PM
Stock Compared to Magnaflow Catback System	PGRICK	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	08-08-2009 02:49 PM
2010 Camaro ARH Headers IN STOCK!!!	Frans96ss	USA - NY / NJ / PA	0	06-05-2009 11:10 AM
Stock Exhaust	Davis	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	05-29-2009 06:18 PM

08-24-2009, 09:05 AM	#2
tbyrne Drives: 1993+1998 Z-28s - past cars Join Date: Apr 2009 Location: Fall River, MA Posts: 434	The Stainless Works headers were available as headers by themselves or packages with cats or offroads to mate up to their exhaust. When I spoke with them last week, I was told that they are now producing transition tubes to alllow their headers to mate up to the factory exhaust. So you can go with the headers and those tubes (http://estore.websitepros.com/208190...il.bok?no=1174) but you won't have any rear 02 bungs and will need to have the computer programmed. If you already have the headers, the tubes alone are supposed to be $75.00. Hope this helps! Tom

08-24-2009, 12:45 PM	#3
o2camaross Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008 Location: Driving Posts: 362	Yes Tom that's exactly what I was looking for.

08-24-2009, 12:46 PM	#4
o2camaross Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008 Location: Driving Posts: 362	Can u get them for me?

08-24-2009, 08:52 PM	#5
o2camaross Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008 Location: Driving Posts: 362	or do i have to go through stainless works?