06-25-2013, 09:50 PM | #1 |
Drives: 2012 ZL1 Join Date: Apr 2013
Location: United States
Posts: 10
|
Clearance the lower control arms
Ok guys,
Who here has ground on their stock LCAs to clearance for the 17x10 welds? Any info, pics, or difficulties would be great as I am considering doing this for now instead of replacing the arms. |
06-25-2013, 10:33 PM | #2 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,408
|
I will be doing the same shortly when I get time. I may actually run the 17x10 and do a few launches to see if they hit. There has been one report that they do not hit on a launch. I think they will but am willing to scuff up my used Welds to find out. I am not aware of a aftermarket ZL1 LCA that will work.
|
06-25-2013, 11:19 PM | #3 |
Drives: 2012 ZL1 Join Date: Apr 2013
Location: United States
Posts: 10
|
The BMR adjustable arms will work, but will also require their sway bar.
|
|
|
|
|