Thanks to Ted at JRE.. Awesome Customer Service - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

pcwizard · 01-08-2018, 09:54 PM

Sending a big thank you to Ted at JRE. He spent a ton of time with me today going over my 2013 ZL1 build that I am currently in the middle of. Ted I will buy all my parts from you from now on just do to the great experience I had today and all the help you offered over the phone. This guy is awesome and knowledge is top notch.

Thanks again,

Brent

JANNETTYRACING · 01-09-2018, 08:05 AM

Quote:

Originally Posted by pcwizard

Sending a big thank you to Ted at JRE. He spent a ton of time with me today going over my 2013 ZL1 build that I am currently in the middle of. Ted I will buy all my parts from you from now on just do to the great experience I had today and all the help you offered over the phone. This guy is awesome and knowledge is top notch.

Thanks again,

Brent

Thank you Brent We appreciate your business and the great review.

Ted.

U LUZE · 01-09-2018, 11:03 AM

I agree with pcwizard. I've trusted Ted with my ZL1 and previously my SRT8 Jeep. If Ted made my 5,000lb brick move 11.6s with a Procharger on low boost I fully trust him to get my Z in the 10s. For anyone looking to mod or that is on the fence Ted is hands down the best choice.

JANNETTYRACING · 01-09-2018, 02:22 PM

Quote:

Originally Posted by U LUZE

I agree with pcwizard. I've trusted Ted with my ZL1 and previously my SRT8 Jeep. If Ted made my 5,000lb brick move 11.6s with a Procharger on low boost I fully trust him to get my Z in the 10s. For anyone looking to mod or that is on the fence Ted is hands down the best choice.

Thank you for your business and great review.

JANNETTYRACING · 01-31-2018, 01:25 PM

Hey Brent, keep us informed on how your build is going Thanks again.

pcwizard · 02-15-2018, 04:16 AM

First start-up JRE Rough Idle am pkg, Trunion Upgrade, Valve Springs & Seals, Melling Pump, Timing Chain, ID1050x Injectors, and LSX Concepts 29% Gilmer Belt Kit, JMS Boost-A-Pump. Ted Jannetty did an awesome job with the SCT Tune for first start up. I live in Indiana (northern) and still have snow so I won't be test driving until we get warmer weather and the snow melts off.
Very impressed Ted.

Thanks Again from Another Satisfied Customer,

Brent

https://www.facebook.com/lsxconcepts...274322/?type=3

https://www.facebook.com/brent.montg...9344154074782/

https://www.facebook.com/brent.montg...9344156794850/

pcwizard · 02-15-2018, 04:26 AM

Proud to advertise for the guy that has helped me the most.

Thanks Again.

JANNETTYRACING · 02-15-2018, 08:03 AM

Quote:

Originally Posted by pcwizard

First start-up JRE Rough Idle am pkg, Trunion Upgrade, Valve Springs & Seals, Melling Pump, Timing Chain, ID1050x Injectors, and LSX Concepts 29% Gilmer Belt Kit, JMS Boost-A-Pump. Ted Jannetty did an awesome job with the SCT Tune for first start up. I live in Indiana (northern) and still have snow so I won't be test driving until we get warmer weather and the snow melts off.
Very impressed Ted.

Thanks Again from Another Satisfied Customer,

Brent

https://www.facebook.com/lsxconcepts...274322/?type=3

https://www.facebook.com/brent.montg...9344154074782/

https://www.facebook.com/brent.montg...9344156794850/

Thank you Brent, JRE is proud to be a part of your build.

Ted.

RobZL1 · 02-15-2018, 05:03 PM

Man, that sounds good. Thanks for posting. I've been debating e85 vs JRE rough idle cam for my next upgrade, and these videos might just sway me. Man that's awesome.

Candr3535 · 02-15-2018, 08:28 PM

Gotta say the best choice for my car was the Rough idle cam by Ted. I just love to hear this car start up.

beersngars · 02-15-2018, 08:52 PM

Definitely sounds awesome. Any problems with this cam in a auto?

CAM....ZL1 · 02-16-2018, 10:00 PM

Quote:

Originally Posted by beersngars

Definitely sounds awesome. Any problems with this cam in a auto?

No problem at all, A6 here with JRE rough idle cam installed last fall. Ted is now dialing in my E85 conversion.

JANNETTYRACING · 02-22-2018, 02:19 PM

Quote:

Originally Posted by RobZL1

Man, that sounds good. Thanks for posting. I've been debating e85 vs JRE rough idle cam for my next upgrade, and these videos might just sway me. Man that's awesome.

Quote:

Originally Posted by Candr3535

Gotta say the best choice for my car was the Rough idle cam by Ted. I just love to hear this car start up.

Quote:

Originally Posted by beersngars

Definitely sounds awesome. Any problems with this cam in a auto?

None whatsoever with my custom tuning.

Quote:

Originally Posted by CAM....ZL1

No problem at all, A6 here with JRE rough idle cam installed last fall. Ted is now dialing in my E85 conversion.

Gentlemen Thank you for your support and your business, we need your feedback and help spreading the word.

Thank you

Ted.

Pro-tuned · 04-26-2018, 08:32 AM

My loyalty is with Jannetty!

01-08-2018, 09:54 PM	#1
pcwizard Drives: 2013 Camaro ZL1 Join Date: Feb 2017 Location: Ligonier, IN Posts: 31	Thanks to Ted at JRE.. Awesome Customer Service Sending a big thank you to Ted at JRE. He spent a ton of time with me today going over my 2013 ZL1 build that I am currently in the middle of. Ted I will buy all my parts from you from now on just do to the great experience I had today and all the help you offered over the phone. This guy is awesome and knowledge is top notch. Thanks again, Brent __________________ 2013 ZL1 Camaro 5.100 miles. Stainless Power Long Tube Headears, Airaid Cold Air,JRE Rough Idle Cam Pkg, Injector Dynamics 1050X injectors, 174 Deg. Thermostat, JMS Bap, LSX Concepts 29% Gilmer Drive, Nitrous Outlet Full Intake System. K-40 Radar Detection System... FAASSTT

01-31-2018, 01:25 PM	#5
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,223	Hey Brent, keep us informed on how your build is going Thanks again. __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

02-15-2018, 04:16 AM	#6
pcwizard Drives: 2013 Camaro ZL1 Join Date: Feb 2017 Location: Ligonier, IN Posts: 31	First start up.. JRE Rough Idle Cam Pkg First start-up JRE Rough Idle am pkg, Trunion Upgrade, Valve Springs & Seals, Melling Pump, Timing Chain, ID1050x Injectors, and LSX Concepts 29% Gilmer Belt Kit, JMS Boost-A-Pump. Ted Jannetty did an awesome job with the SCT Tune for first start up. I live in Indiana (northern) and still have snow so I won't be test driving until we get warmer weather and the snow melts off. Very impressed Ted. Thanks Again from Another Satisfied Customer, Brent https://www.facebook.com/lsxconcepts...274322/?type=3 https://www.facebook.com/brent.montg...9344154074782/ https://www.facebook.com/brent.montg...9344156794850/ __________________ 2013 ZL1 Camaro 5.100 miles. Stainless Power Long Tube Headears, Airaid Cold Air,JRE Rough Idle Cam Pkg, Injector Dynamics 1050X injectors, 174 Deg. Thermostat, JMS Bap, LSX Concepts 29% Gilmer Drive, Nitrous Outlet Full Intake System. K-40 Radar Detection System... FAASSTT Last edited by pcwizard; 02-15-2018 at 04:32 AM. Reason: forgot information

02-15-2018, 04:26 AM	#7
pcwizard Drives: 2013 Camaro ZL1 Join Date: Feb 2017 Location: Ligonier, IN Posts: 31	Just a little Advertising Proud to advertise for the guy that has helped me the most. Thanks Again. Attached Images __________________ 2013 ZL1 Camaro 5.100 miles. Stainless Power Long Tube Headears, Airaid Cold Air,JRE Rough Idle Cam Pkg, Injector Dynamics 1050X injectors, 174 Deg. Thermostat, JMS Bap, LSX Concepts 29% Gilmer Drive, Nitrous Outlet Full Intake System. K-40 Radar Detection System... FAASSTT

02-15-2018, 05:03 PM	#9
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,281	Man, that sounds good. Thanks for posting. I've been debating e85 vs JRE rough idle cam for my next upgrade, and these videos might just sway me. Man that's awesome. __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp Past Rides- 2014 ZL1 M6 Red Hot \| Tons of mods 2004 CTS-V M6 Silver \| Many mods 1995 Corvette M6 Torch Red \| A few more mods 1992 Camaro M5 White \| A few mods

01-09-2018, 11:03 AM	#3
U LUZE Drives: 2012 ZL1 Join Date: Jul 2017 Location: Southeast Minnesota Posts: 118	I agree with pcwizard. I've trusted Ted with my ZL1 and previously my SRT8 Jeep. If Ted made my 5,000lb brick move 11.6s with a Procharger on low boost I fully trust him to get my Z in the 10s. For anyone looking to mod or that is on the fence Ted is hands down the best choice.

02-15-2018, 08:28 PM	#10
Candr3535 Drives: 2013 ZL1 Triple Black Vert M6 #5591 Join Date: May 2013 Location: Galloway,NJ Posts: 747 View My Garage	Gotta say the best choice for my car was the Rough idle cam by Ted. I just love to hear this car start up. __________________ 695 RWHP / 660 RWTQ @ 13.5 PSI Dyna-Tech Headers Ceramic Coated w/Super Flo Cats, JRE Custom Rough Idle Racing Cam Package and 125 RWHP Pulley Kit w/ 28% pulley, Custom Tune by Ted, ID850 injectors, JMS Fuel Booster, NGK Plugs, MSD Plug Wires, Roto-Fab CAI, Roto-Fab Big Gulp, Elite Catch Can, Mild to Wild, 90mm VMaxx Ported Throttle Body, Skip Shift Elim., D3 Coolant Resevoir, Separated Clutch Resevoir, and Fuzzy Red Dice..

02-15-2018, 08:52 PM	#11
beersngars Account Suspended Drives: 2012 ZL1 Join Date: May 2017 Location: Ohio Posts: 140	Definitely sounds awesome. Any problems with this cam in a auto?

04-26-2018, 08:32 AM	#14
Pro-tuned Angewendet Ingenieur Drives: 14 Camaro ZL1 Join Date: Apr 2015 Location: USA Posts: 401	My loyalty is with Jannetty! __________________ ———— LQ9, Iron Block, Forged internals, 408CI, Jannetty custom cam, TS short block, Whipple, Hardened Jackshaft, PRC 260, 2X3 Dynatech Full Competition, HF Cats, CAI, NW 103, Chee, ID 1300, COPO Breather, MSD, Fore Dual Pump, ultratorque, E85, dual Meth, True Trac, 3:45, 1500hp axle-shafts, DSS CF, BMR, custom Pearl/Candy paint by Jaidah.