06-03-2016, 04:02 PM | #15 |
|
|
06-09-2016, 02:46 PM | #16 |
|
Lashway Motosports on 22" Vossen and 1.5" springs.
|
06-11-2016, 09:27 AM | #17 |
Drives: 2016 1SS White MT Join Date: Aug 2011
Location: Hollywood Florida
Posts: 210
|
Any updates on the new batch?
__________________
2016 White 1SS with Port & Polish Heads and Cam by Texas Speed , Forged Drop in Pistons and Rods by Cunningham M , Procharger D1SC , Air to Air Race Intercooler, Race Valve , Helical Gears , Alky Meth Kit , Zl1 Low Side Pump , LT4 HPFP , V-Max Ported TB , MSD Atomic IM , ARH 1-7/8 Catless , Borla S Type Cat-Back . Work done by Lashway Motorsports 790RWHP-649RWTQ
|
06-13-2016, 08:26 AM | #18 |
|
|
10-14-2016, 03:58 PM | #19 |
|
Alright guys!!
It has been a long time coming but here is an update on what we have going on. The pictures below will show a factory spring and our new design. The issue we had with the previous batch has been fixed. We are going to put a few miles on our shop car with the new springs just to make sure we do not have any issues, so far we are happy with the fitment. The ride height shows to be about 1/4" higher then the previous springs but we are hoping they will settle a bit and close that gap to where it was before. Once we give the green light to go ahead with production we are looking at about 3-4 weeks before we have them ready to go. I know I have been getting messages on C6, Facebook, Instagram, and many phone calls about these. Stay with us guys we are working on it!! Sorry in advance for the cell phone pics...... Stock Springs: Phastek Springs: |
01-20-2017, 02:54 PM | #20 |
|
|
08-27-2017, 12:59 PM | #21 |
Bigg Balls
|
What's the distance from the front facia guard ( bottom black piece) to the ground after installing.
__________________
2017 Red Hot 1SS 8A..... Sold for a minivan
|
|
|
Post Reply
|
Tags |
camaro springs, lower, lowering springs, phastek springs, springs |
|
|