07-31-2018, 07:22 PM | #1 |
Drives: 2018 2SS M6 Redline Join Date: Oct 2014
Location: United States
Posts: 431
|
Preparation for paint correction and ceramic coating
After 3 years of semi-neglecting my paint like an idiot and using soft touch automatic car washes, my car's got swirls all over. I'm finally going to perform paint restoration on it. What I've planned so far is:
1. Pull out door dings and dents (PDR) 2. Wash first with Dawn soap 3. Claybar 4. Hit it with Meguire's Ultimate compound 5. Polish 6. Ceramic coating Does this sound like the correct process or what would you do differently? |
08-01-2018, 10:46 AM | #2 |
Drives: 2011 Camaro SS Join Date: Sep 2017
Location: Peoria
Posts: 254
|
I would not wash with dawn dish soap - that can dry out the rubber parts.
I would wash Clay bar ironx Polish IPA wipe down (to remove polishing oils) Inspect the paint for any swirls (polish again if needed) Then coat |
|
|
|
|