Some recent airbrushing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

adamDallas · 05-16-2013, 08:22 AM

Hey guys, just posting more projects for fun.
These are two liners that i recently finished up.
The reaper and skull are a month or two old, but i never got around to posting.

Both were fun projects. Thanks for the opps guys! Beautiful rides!

hrpiii · 05-16-2013, 08:34 AM

Those are awesome man, great work!!! Love the skull crushing/eating the ford logo

blkngldbabe · 05-16-2013, 09:07 AM

Fabulous work!

adamDallas · 05-16-2013, 08:46 PM

Thanks guys!

BAD DAB · 05-16-2013, 08:48 PM

Nice work!

Liam · 05-17-2013, 03:05 AM

They all look really great! Have you ever used a clear or resin of any kind on hood liners before or after the fact to protect them and make the images sharper? I've always thought that material would not hold up on its own.

Blues45th · 05-17-2013, 06:06 AM

Liam was thinking same thing. Looks great though

Maxspeed · 05-17-2013, 07:11 AM

Where does the guy live that you did the reaper and skull for? I saw either that one or one like it at a car show in Mass last night.

adamDallas · 05-17-2013, 10:41 AM

hey guys, i thought of trying to figure out a better way to seal it, as well as make the material easier to work with.
Its a fabric like material, which sometimes likes to soak up paint.
Iv experimented with shooting coats of paint on the fabric before airbrushing. This makes the surface a bit more solid, allowing for firmer lines. But still not really a HUGE difference.

When time persists id really like to try using a resin to put over the liner and clear coat the art.
I know some hoodliner artists who do this, and they usually come out fantastic, but they also charge nearly triple what i usually ask. like $1200 compared to my $350-ish.
Plus the shipping which can be up to $175 sheesh.

Iv always wanted to try this though. Seems like a great way to protect the art, as well as get a better quality line. Sounds like a fun project.

adamDallas · 05-17-2013, 10:44 AM

@maxspeed: I dont really remember where he lived, but Mass sounds about right. Could be, as i do plenty of work that goes up north in that area.

pannhead51 · 05-17-2013, 10:45 AM

Good stuff ...very talented.

FijiKid · 05-17-2013, 12:36 PM

Very Nice!

2ndtimess · 05-31-2013, 04:14 PM

Hey all

I do live in southeastern mass and try to make the car show in foxboro as much as I can. I did have adam do the hood liner and it came out great. Here is the whole engine bay

05-16-2013, 08:22 AM	#1
adamDallas Blast Airbush Drives: Sts-V Join Date: Mar 2010 Location: Houston Posts: 92 View My Garage	Some recent airbrushing Hey guys, just posting more projects for fun. These are two liners that i recently finished up. The reaper and skull are a month or two old, but i never got around to posting. Both were fun projects. Thanks for the opps guys! Beautiful rides! __________________ Trans Am cadi cts C6 Vette f250 powerstroke diesel 09 Silverado -sold-

05-16-2013, 09:07 AM	#3
blkngldbabe Barossa's handler Drives: 2LT/RS RJT Join Date: Mar 2010 Location: Highland Chev,Aurora Ontario Posts: 1,097	Fabulous work! __________________ SLP's GTA Master Specialty Vehicle and Master Parts Dealer

05-16-2013, 08:46 PM	#4
adamDallas Blast Airbush Drives: Sts-V Join Date: Mar 2010 Location: Houston Posts: 92 View My Garage	Thanks guys! __________________ Trans Am cadi cts C6 Vette f250 powerstroke diesel 09 Silverado -sold-

05-16-2013, 08:48 PM	#5
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,228 View My Garage	Nice work! __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

05-17-2013, 07:11 AM	#8
Maxspeed ~COTW 6/30/14~ Drives: 2011 Camaro SS/RS Join Date: Oct 2011 Location: Mansfield Mass Posts: 2,906 View My Garage	Where does the guy live that you did the reaper and skull for? I saw either that one or one like it at a car show in Mass last night. __________________ Mods: Heritage Grill, Blade Spoiler, Corrado Hoodliner Mural, Premium Engine Boxes, Radiator Shroud, Custom Painted Bowties, Dipstick & Engine Caps, RX Catch Can, Corsa cat back exhaust, CAI black powder coat cold air, Apex cold air intake scoop and Apex washer tank relocate kit, Dynatech SuperMAXX Ceramic Coated LT Headers, High Flow Cats, JRE470 Rough Idle Cam Package, DSS 1,000 RWHP Axels, Slowhawk Mustang Dyno Tune, QTP QTEC 66 Low Profile Cutouts and iTSX. 453 RWHP 427 RWTQ WEB LINKS BUILD TIMING CHAIN FAILURE TRANSITION FROM STOCK TO CAM VID

05-16-2013, 08:34 AM	#2
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,527	Those are awesome man, great work!!! Love the skull crushing/eating the ford logo

05-17-2013, 03:05 AM	#6
Liam Tampa Bay Camaros Drives: 2016 Camaro 2SS, Hyper Blue Join Date: Jan 2013 Location: New Port Richey, Florida Posts: 253 View My Garage	They all look really great! Have you ever used a clear or resin of any kind on hood liners before or after the fact to protect them and make the images sharper? I've always thought that material would not hold up on its own.

05-17-2013, 06:06 AM	#7
Blues45th ......................... Drives: 45th anniversary edition v6 3.6L Join Date: Sep 2012 Location: Dunedin, Florida Posts: 920 View My Garage	Liam was thinking same thing. Looks great though

05-17-2013, 10:41 AM	#9
adamDallas Blast Airbush Drives: Sts-V Join Date: Mar 2010 Location: Houston Posts: 92 View My Garage	hey guys, i thought of trying to figure out a better way to seal it, as well as make the material easier to work with. Its a fabric like material, which sometimes likes to soak up paint. Iv experimented with shooting coats of paint on the fabric before airbrushing. This makes the surface a bit more solid, allowing for firmer lines. But still not really a HUGE difference. When time persists id really like to try using a resin to put over the liner and clear coat the art. I know some hoodliner artists who do this, and they usually come out fantastic, but they also charge nearly triple what i usually ask. like $1200 compared to my $350-ish. Plus the shipping which can be up to $175 sheesh. Iv always wanted to try this though. Seems like a great way to protect the art, as well as get a better quality line. Sounds like a fun project. __________________ Trans Am cadi cts C6 Vette f250 powerstroke diesel 09 Silverado -sold-

05-17-2013, 10:44 AM	#10
adamDallas Blast Airbush Drives: Sts-V Join Date: Mar 2010 Location: Houston Posts: 92 View My Garage	@maxspeed: I dont really remember where he lived, but Mass sounds about right. Could be, as i do plenty of work that goes up north in that area. __________________ Trans Am cadi cts C6 Vette f250 powerstroke diesel 09 Silverado -sold-

05-17-2013, 10:45 AM	#11
pannhead51 Drives: 2SS convertible Join Date: Dec 2012 Location: Sacramento Posts: 366	Good stuff ...very talented.

05-17-2013, 12:36 PM	#12
FijiKid Drives: Cyber Grey Camaro SS Join Date: Apr 2011 Location: SJ CA Posts: 429 View My Garage	Very Nice! __________________ Borla "S"type Cat Back / Hotchkis TVA2 Suspension Kit / Rotofab Intake / Tinted Windows / Headlight Armor Tailight Smoke / P13 DRLs w Harness / De-badged / Satin Black Power Coated Stock Wheels / Gloss Black Calipers / EPCO Custom Knob. ...

05-31-2013, 04:14 PM	#13
2ndtimess 2ndtimeSS Drives: 2010 2SS 6 speed Infernal Orange Join Date: Aug 2010 Location: Middleboro Ma Posts: 185 View My Garage	Hey all I do live in southeastern mass and try to make the car show in foxboro as much as I can. I did have adam do the hood liner and it came out great. Here is the whole engine bay __________________