02-20-2018, 04:54 PM | #1 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
WTB 2014-15 Z28 left upper manifold heat shield help!
WTB left upper exhaust shield if anyone is putting long tubes on?
in this picture its on left side in the middle could also use 6-7 bolts too
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
02-20-2018, 08:46 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
GM PN is 12629722 no price but the right side is only 42 bucks.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-21-2018, 07:47 AM | #3 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
I found that looking at some 2017 ZL1 manifolds these are almost spot on as Z28 manifolds but the collector is now 4 bolt instead of 2 but shields look same I got PM 12666097 and that list for over 206$ fot a piece of tin!
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
02-21-2018, 11:16 AM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Wow!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-17-2018, 10:03 AM | #5 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
still looking for left manifold upper heat shield
help?
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
07-27-2018, 12:02 PM | #6 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
OK I found this shield on eBay without the bolts that attach them does anyone have 4-5 of them they could spare
Please?
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
07-27-2018, 01:40 PM | #7 |
Drives: 2011 ss Join Date: Sep 2015
Location: E-TX
Posts: 764
|
Pull one from the other side and go match it up at the parts store if you don't have any luck here
|
07-31-2018, 04:14 PM | #8 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
dealer wanted $8 a bolt for these! no lie
pass on hardware bolts I want them all uniform, I did find some that will work
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
05-14-2019, 12:28 PM | #9 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
still looking for some bolts for heat shields?
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
05-15-2019, 07:40 AM | #10 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
what is the bolt part number your looking for?
|
|
|
|
|