Power steering failure and no cooling fans - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ret Grunt21 · 07-22-2018, 08:17 PM

I just finished installing an LS3 into my 14 SS. The L99 blew. Got it in and running today. Did a cam swap, pushrods and springs. Also installed my long tubes. Started it up (needs a tune of course) but I have no power steering. It’s the electronic assist. Also no cooling fans. Digital temp shows 208 but the analog guage says it’s fine. Car has been sitting since December of 2017 and just reconnected the battery today. Any ideas fellas? Need some help with this one.

silversleeper · 07-22-2018, 09:18 PM

Electrical grounding issue, not connected poor connection. Hopefully you didn't burn up the elec steering.

07-22-2018, 08:17 PM	#1
Ret Grunt21 Drives: 2014 Camaro SS Join Date: Jun 2017 Location: Albuquerque NM Posts: 12	Power steering failure and no cooling fans I just finished installing an LS3 into my 14 SS. The L99 blew. Got it in and running today. Did a cam swap, pushrods and springs. Also installed my long tubes. Started it up (needs a tune of course) but I have no power steering. It’s the electronic assist. Also no cooling fans. Digital temp shows 208 but the analog guage says it’s fine. Car has been sitting since December of 2017 and just reconnected the battery today. Any ideas fellas? Need some help with this one. __________________ 2014 Camaro SS- Full L99 to LS3 swap with auto trans. Comp 296 HR cam, Comp springs and retainers and Comp chromoly pushrods. CAI, DNA Motorsport Longtube Headers, cat delete, ZL1 mid pipe, Corsa Mufflers, All L99 VVT and DoD deleted. Dyno tuned at Southwest Speed Rio Rancho NM. 400hp and 391 lbs ft of torque.

07-22-2018, 09:18 PM	#2
silversleeper Big Crow Drives: '13 ZL1 Join Date: Mar 2017 Location: California Posts: 1,483	Electrical grounding issue, not connected poor connection. Hopefully you didn't burn up the elec steering.