Recommend me a longer stud

[Matt8892(2)]

I’m gunna need to run 10mm spacers on the fronts for my new rim set up. I got the spacers covered. I know to go hub centric and all that. My question is studs. I know for a fact that the factory studs will not be long enough. Can someone recommend a part number or the proper length stud I would need for a 10mm spacer?

I’ve read some guys have used 2009 and up ctsv studs cause they’re 7mm longer. Not sure if there’s a better option out there

Thanks guys

[Matt8892(2)]

Dorman 610-428 is 7mm longer than stock studs and what I went with in case anyone needs an answer to this in the future

[Greencamaro1234]

I have some.that I had for mine.

[AG1LE]

Here's what I'm using:

http://www.jdpmotorsports.com/brands...z28-jdp-ch1001

[Matt8892(2)]

Originally Posted by Greencamaro1234

I have some.that I had for mine.

I ordered the dorman already

[Matt8892(2)]

Originally Posted by AG1LE

Here's what I'm using:

http://www.jdpmotorsports.com/brands...z28-jdp-ch1001

Those look awesome, but they seem like they’ll be over kill for me seeing as I’m only going with a 10mm spacer. So the additional 7mm should be plenty to get me to my full 9 turns of the lug