06-17-2014, 03:28 PM | #1 |
|
Raceready Exhaust Cutouts For Sale
SOLD SOLD SOLD
Selling my raceready exhaust cutouts. These will really release the beast and make your car much louder, while also giving you the option of closing them for quiet exhaust when you want it. Fits 2.5" exhaust systems. I really enjoyed having these, but I now have 3" exhaust so they no longer fit. They even won me a "Best Sounding Car" at a show in Denver. Both the motors were replaced on warranty with brand new ones, so this system is practically new. Price new is $639, I'll sell these for $450 + shipping. Here's a video of them installed on my car. SAVE ON THIS PACKAGE DEAL (Costs $639.99 new), which comes with an RRP dual electric exhaust cutouts, 2 Stainless Steel Y-Pipes w/ floating 3-bolt flanges, 2-Turndown Tips, and 4- Stainless Steel Band Clamps. This package comes with everything you need to open your exhaust so your engine can breath and get you that extra horse power your looking for. This package is perfect for late model cars and trucks with stainless steel OE exhaust systems, these dumps are 100% stainless steel to prevent rust. Installation is simple because the dumps' ID sizing eliminates the need to weld; all you have to do is slip the dumps over OD-sized pipes and clamp them in place. This is an all-in-one package that lets you choose to weld-in or use the clamps for easy removal/installation! 2.5" RRP CUTOUT FEATURES: * Housing is manufactured from 6061-T6 billet aluminum and machined down to .600" thick to ensure flatness. * Double sealed butterfly to ensure no leaks * "Bull Nose" butterfly seals in matching "Bull Nose" seat * High temp o-ring to ensure complete seal * Housing is CNC machined to insure positive seal to "Y" pipe * 303 Stainless Steel Butterfly * Stainless steel shafts * Stainless steel coupler * Stainless steel hardware * Proven dependable gear reduction drive motor * Slotted mounting bolt holes for flexibility in mounting position RRP HEAVY DUTY HARNESS: * Built In Thermal Protection device to protect motor from overload * Weather tight connectors on all outside connections * 1 amp quick blow fuse built into harness * 16 ga. Heavy Duty heat resistant wire * Labeled positive and negative leads for ease of installation *MADE IN THE USA KIT INCLUDES: - 2.5" RACE READY PERFORMANCE CUTOUTS - Race Ready Heavy-Duty Harness - Race Ready standard two way, momentary rocker switch. Illuminates red so it's easy to see and easy to operate. It comes with the built-in electronics to operate the RRP Electric Cutouts. - 2.5" Stainless Steel Y-pipes w/ floating 3-bolt flanges, which is great for applications with tight floor-to-pan or limited ground - 2.5" Floating 3-bolt flanged exhaust turndown tips. Aluminized, mandrel bent and flanged exhaust turndowns redirect exhaust gases from your header collector or exhaust cutout. Safely routes heat away from potential hazards and sound out from underneath of the vehicle. Features floating flanges and 7" overall length. Includes gaskets with stainless steel bolts, washers and nuts for easy installation or removal. - 2.5" Stainless Steel Band Clamps to assure smoother exhaust flow. - Extra thick gaskets which seals better and helps insulate against heat - High Quality mounting bolts and nuts Also selling: Quad Exhaust Tips Corsa Sport Catback Rx Catchcan w/ Breather Cap Cold Air Inductions V8 CAI Last edited by Powhusku; 07-28-2014 at 10:00 AM. |
06-18-2014, 11:45 AM | #2 | ||
Drives: 2010 camaro ssrs Join Date: May 2014
Location: grovetown ga
Posts: 31
|
Quote:
Sent from my SM-N900V using Tapatalk |
||
06-18-2014, 02:09 PM | #3 |
|
No lowballers please. $450 + shipping
|
06-19-2014, 02:46 PM | #4 |
|
Here's another video of them showing the difference they make!
Last edited by Powhusku; 06-25-2014 at 09:05 AM. |
06-20-2014, 04:20 AM | #5 |
Join Date: Jun 2014
Posts: 11
|
Where are you located? City/state area.
Sent from my SGH-I317M using Tapatalk |
06-20-2014, 08:31 AM | #6 |
|
Laramie, WY.
|
06-25-2014, 09:22 AM | #7 |
|
Bump.
|
07-03-2014, 06:42 PM | #8 |
Drives: 10 Camaro SS Join Date: Apr 2013
Location: MT
Posts: 47
|
still available?
|
07-16-2014, 12:16 PM | #9 |
|
|
07-16-2014, 01:52 PM | #10 |
Drives: 2010 IOM 2ss/RS Join Date: Sep 2009
Location: SoCal, I.E.
Posts: 1,545
|
would these fit elsewhere on the car, like further back where the resonators would be etc...?
__________________
Turbonetics running 8lbs boost at 700rwhp tuned by Hi Rev, installed by K&M w/cat-muffler delete, ACS splitter, Fesler GFX, MPD1 spoiler, Custom painted Rally stripes, Cordon CR1 wheels 275/315s, Hotchkiss comp sways and end links, Barton shifter
|
07-16-2014, 10:25 PM | #11 |
Drives: 10 Camaro SS Join Date: Apr 2013
Location: MT
Posts: 47
|
Pm'd u
|
07-23-2014, 09:29 AM | #12 |
|
Due to the space required, I thing between the j pipe and the cats or just before the mufflers are the only places they will fit. You could try putting them there and they may fit, but they'll probably hang pretty low.
|
07-26-2014, 10:26 AM | #13 |
|
Sale pending.
|
07-28-2014, 09:59 AM | #14 |
|
SOLD
|
|
|
|
|