Power steering line problem - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

a2002hd · 02-28-2020, 05:17 PM

Wondering if anyone might have some information about this one.
The build is a 14 rs was a v6 and now is a LSX454, I purchased a gmpp accessory drive kit and a high pressure power steering line for a 14 as a Camaro.
The problem is when I tighten the line to the pump the fitting is TIGHT but the line is not. The line has a inverted flare and the fitting it threads into has a square counter bored hole to receive the line.
I'm wondering if the fitting in the pump needs changed.

CamaroBarb · 02-28-2020, 07:53 PM

Do you have the o-ring installed on the end of the line?

02-28-2020, 05:17 PM	#1
a2002hd Drives: 2014 camaro Join Date: Aug 2018 Location: ohio Posts: 7 View My Garage	Power steering line problem Wondering if anyone might have some information about this one. The build is a 14 rs was a v6 and now is a LSX454, I purchased a gmpp accessory drive kit and a high pressure power steering line for a 14 as a Camaro. The problem is when I tighten the line to the pump the fitting is TIGHT but the line is not. The line has a inverted flare and the fitting it threads into has a square counter bored hole to receive the line. I'm wondering if the fitting in the pump needs changed.

02-28-2020, 07:53 PM	#2
CamaroBarb Banned Drives: cheby Camaro Join Date: Aug 2019 Location: usa Posts: 575	Do you have the o-ring installed on the end of the line?