QUICRNU Build -LSA BTR YANK Supercars etc... - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

QUICRNU · 10-06-2017, 11:09 PM

Quote:

Originally Posted by AG1LE

Do you have a part number for the upgrade driveshaft?

Propshaft: 22960156 - per Upgrade parts list.

http://www.camaro5.com/forums/showth...2960156&page=4

hammdo · 10-08-2017, 11:50 PM

Those are nice! I have my spare mt drag radials on zl1 rims... maybe one of these days...

Keep it up!

-Don

QUICRNU · 10-10-2017, 09:01 PM

[SIZE="4"]
So, I had a pretty LOoooooonnnnngggggg weekend working on the car, should have recruited some help.......

Pedders 27MM adjustable front and 32MM rear solid bars endlinks etc.

I decided to get the Billet Radius Rod Inserts from JPSS and the Caster Locks.

This suspension install was certainly a challenge, the Front sway bar puzzle, with my custom Trans cooler, Custom Power Steering Cooler and all the other lines etc... wow.... did it suck, but I figured it out. I also decided to paint the sway bars black, I wasn't fond of the red since it didn't really match

Name: 20171004_225556.jpg
Views: 509
Size: 138.6 KB

Name: 20171004_225556.jpg
Views: 509
Size: 138.6 KB

Name: 20171004_225650.jpg
Views: 499
Size: 86.7 KB

Name: 20171004_225837.jpg
Views: 503
Size: 148.7 KB

Name: 20171004_225941.jpg
Views: 485
Size: 95.8 KB

Name: 20171004_225732.jpg
Views: 499
Size: 175.3 KB

Name: 20171005_223929.jpg
Views: 516
Size: 138.2 KB

Name: 20171006_140606.jpg
Views: 506
Size: 142.0 KB

CRF8 · 10-21-2017, 12:48 PM

Stripped set screw and missing nuts?? Unacceptable

Sent from my iPhone using Tapatalk

QUICRNU · 10-21-2017, 12:52 PM

Quote:

Originally Posted by CRF8

Stripped set screw and missing nuts?? Unacceptable

Sent from my iPhone using Tapatalk

QUICRNU · 10-28-2017, 03:25 PM

[SIZE="4"]
Just trying to get a few odds and ends on where I am with the car, I did cut and clamp the mufflers, I am not sure which way I want to go with exhaust in the future, but I know after dropping this heavy solid piece system solo a few times, I wanted it in 2 pieces! lol

Name: 20171007_211438.jpg
Views: 486
Size: 195.3 KB

Name: 20171007_211438.jpg
Views: 486
Size: 195.3 KB

hammdo · 10-28-2017, 04:05 PM

Those are nice seats for sure!

Did you use the resistors for the airbags?

BTW, don’t blame me ;o)

Yes, the Recaros rock!

-Don

QUICRNU · 10-28-2017, 04:36 PM

Quote:

Originally Posted by hammdo

Those are nice seats for sure!

Did you use the resistors for the airbags?

BTW, don’t blame me ;o)

Yes, the Recaros rock!

-Don

100% your fault.

hammdo · 10-28-2017, 08:12 PM

Oh ok, well then you’re welcome. I’m sure your wife hates me now ;o)

-Don

hammdo · 10-31-2017, 09:00 PM

Nice run! About time you get some numbers!

2 runs sucks though....

Glad to see it off ‘jack’ stands... pun intended ;o)

-Don

BiggFoot · 11-29-2017, 09:23 AM

Really nice write-Up Quick and worthy of a 5 star rating in my book

hammdo · 12-04-2017, 01:57 AM

9s! Awesome...congrats....

-Don

Ashen 6.2 · 12-04-2017, 05:30 AM

Very nice & Congrats!

John_C · 12-04-2017, 06:44 AM

Dang! 9's!

I need to copy your build. LOL

10-08-2017, 11:50 PM	#128
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Those are nice! I have my spare mt drag radials on zl1 rims... maybe one of these days... Keep it up! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

10-10-2017, 09:01 PM	#129
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	[SIZE="4"] So, I had a pretty LOoooooonnnnngggggg weekend working on the car, should have recruited some help....... Pedders 27MM adjustable front and 32MM rear solid bars endlinks etc. I decided to get the Billet Radius Rod Inserts from JPSS and the Caster Locks. This suspension install was certainly a challenge, the Front sway bar puzzle, with my custom Trans cooler, Custom Power Steering Cooler and all the other lines etc... wow.... did it suck, but I figured it out. I also decided to paint the sway bars black, I wasn't fond of the red since it didn't really match __________________ Apex Focused Last edited by QUICRNU; 02-04-2021 at 06:22 PM.

10-21-2017, 12:48 PM	#130
CRF8 Scenic City Camaro Drives: 2022 Camaro ZL-1 /1974 Firebird 400 Join Date: Jan 2014 Location: Chattanooga TN Posts: 578 View My Garage	Stripped set screw and missing nuts?? Unacceptable Sent from my iPhone using Tapatalk __________________ 2022 Camaro ZL-1, grey 1974 Firebird Formula 400, white https://www.facebook.com/groups/Camaro/ https://www.facebook.com/CRFinTN/?modal=admin_todo_tour

10-28-2017, 03:25 PM	#132
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	[SIZE="4"] Just trying to get a few odds and ends on where I am with the car, I did cut and clamp the mufflers, I am not sure which way I want to go with exhaust in the future, but I know after dropping this heavy solid piece system solo a few times, I wanted it in 2 pieces! lol __________________ Apex Focused Last edited by QUICRNU; 02-04-2021 at 06:24 PM.

10-28-2017, 04:05 PM	#133
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Those are nice seats for sure! Did you use the resistors for the airbags? BTW, don’t blame me ;o) Yes, the Recaros rock! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

10-28-2017, 08:12 PM	#135
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Oh ok, well then you’re welcome. I’m sure your wife hates me now ;o) -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

10-31-2017, 09:00 PM	#136
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Nice run! About time you get some numbers! 2 runs sucks though.... Glad to see it off ‘jack’ stands... pun intended ;o) -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

11-29-2017, 09:23 AM	#137
BiggFoot Drives: 2010 Camaro (M6) 1000+ HP SBE Join Date: Jun 2011 Location: Houston Posts: 1,391	Really nice write-Up Quick and worthy of a 5 star rating in my book __________________ F-1X, Cog Drive, ATI Super Pulley/Sprag ~ 19 psi Blower Cam Brodix BP BR 3 Heads Kooks LT Headers and full 3" exhaust Fore Triple Pump Fuel System with ID 1700X Injectors - E85 conversion DSS 9” Conversion (1400 hp axles, driveshaft, pumpkin) & Strange 3.70 gears McLeod RXT Twin HD Clutch & Upgraded Slave RPM Level VII TR6060 BMR Drag Suspension Package w/Strange shocks Carlyle 15" and M/T ET Street R radials 10.1 @ 143 mph 1/4 mile

12-04-2017, 01:57 AM	#138
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	9s! Awesome...congrats.... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

12-04-2017, 05:30 AM	#139
Ashen 6.2 Drives: 2014 Camaro Z/SS Join Date: May 2014 Location: NW Arkansas Posts: 2,004 View My Garage	Very nice & Congrats! __________________ 2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561 Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP

12-04-2017, 06:44 AM	#140
John_C LSx FTW!!! Drives: 2010 Camaro 2SS RS Join Date: Jan 2017 Location: TN Posts: 767	Dang! 9's! I need to copy your build. LOL __________________ 2010 2SS RS A6 781rwhp on E85 Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite