10-14-2010, 04:00 PM | #1 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Supercharged SS goes into Version 3
Not sure where to put this so since it contains drivetrain info I'll stick it here. We decided to go with a Jannetty Racing 4.10 built rear with Ted's posi kit. He seems to think that this will work best for the car and he hasn't steered me wrong yet. Time will tell. Fortunately for me, my Buddy Ray, Fastfaster on here if he hasn't been baned yet, offered me a deal I couldn't resist on the rear so it was a no brainer. It was so gd that it would have been stupid not to do. So maybe I'll run a vinyl deacl of him on my hood at the track in appreciation!
So with that Ted is also going to install the Pfadt trailing arms and bushings. Hopefully this will help with the 60' and knock a little off the ET. Only time will tell. Install hopefully the end of next wk. Ray is waiting for his 9" to show up. Thank you to all you guys that offered me advice. It really helped me. Now we just wait and see what happens and go from there. Thanks again! |
10-15-2010, 06:25 AM | #2 |
Drives: Nothing Fun. Join Date: Aug 2009
Location: CT
Posts: 1,052
|
Nice!!! ET Predictions?
|
10-15-2010, 07:02 AM | #3 |
Drives: 2010 2SS/RS IBM Black Polished Join Date: Feb 2009
Location: Colorado
Posts: 2,108
|
Wow I love the numbers you had and cant wait to see what you do with 4.10's Question though..why an underdrive pully with a SC. doesnt that defeat the purpose of smaller pully on the sc? How many passes so far on stock bottom end?
__________________
418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts
|
10-15-2010, 07:27 AM | #4 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
Good move. At the stage your at suspension is a critical factor.
|
10-15-2010, 08:26 AM | #5 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
It's an 10% overdrive pulley, not an underdrive pulley. On the rebuilt stock bottom end 12 or so mid to low 10 second passes. I just got the car back a wk ago.
|
10-15-2010, 08:27 AM | #6 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
10-15-2010, 08:47 AM | #7 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
|
10-15-2010, 09:41 AM | #8 |
Drives: 2010 SS Black Join Date: Jul 2009
Location: Parkland, Florida
Posts: 171
|
Supercharger,
Mine and your setup's are pretty close and would love to swap stories. Ran a 11.21 on Wen. and know I should be able to get into a 10.9 Thinking about the 4.10 as well and have also looked into the cluch and axel's are well. the 11.2 was made using 20" with nitto 315 N05R tires. Are you using 17" tires on front and back??? was looking into doing 17" Mickys in the rear to get a better takeoff.
__________________
2SS- M6 - 849 RWHP, 757 RWTQ - YSI -Supercharger - Comp Cams Stage 3 Blower Cam -54-471-11 - (In-239/624 - Ex 255/624)
MTI - CAI - Meth Injection Systems using 50/50 mix - Kooks 1 7/8" Headers with 3" catted X-Pipe - Kooks muflers to tips - LSR Short Throw Shifter - NGK TR6 Spark Plugs - 160 degree thermostat - LSR Sway Bars (Front & Rear) - BMR Subframe Connectors bolt-on - DSS - lingenfelter 9" w/ 4.10P - PFADT coilover front/back - BMR Spherical Toe rods / Trailing arms - Posi lock - |
10-15-2010, 05:51 PM | #9 | |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
In the front I still run the stock 20". In the back I run a 28x10x17 Hoosier bias ply slick. Up until now its been great. High 1.4 to low 1.5 60's every single time. Today we did the new 4.10 rear with the Jannetty Posi Mod. In addition to that we put in the Pfadt trailing arms and bushings and at the last minute decided to install some DSS 1400hp axles. The Ted went to work and retune the trans and its back to perfect again. First shot and in a few minutes! We test drove the car and its much better with the 4.10s and Teds tune. Shifts are great, nice and firm and quick, the rpms stay up between shifts, it all works out. So now its back to the track next Friday to see what we need to change next! |
|
10-15-2010, 10:46 PM | #10 | |
Drives: 2010 2SS/RS IBM Black Polished Join Date: Feb 2009
Location: Colorado
Posts: 2,108
|
Quote:
__________________
418 Stroker, 621RWHP 648 lbs TORQUE Built by Laramie GM Auto Center Tuned by Nick at Mac Autosport. EForce SC, 2 3/4pulley,LPE dual fuel pump, JRE Twin fuel rail upgrade, posi clutch kit, RX oilcatch can and breather, Callies Compstar crankshaft and rods, Racing bearings, CP -13.8 race pistons, steel rings, Comp Cams X6 blower cam, Springs, HD timing chain and tensioner, Doug Thorley Tri Y LT headers, 89.7lb injectors, RPM rollbar, DSS1400 shafts, Simpson 5 pt harness, BMR Toe rods and trailing arms, led lights, RPM input and output shafts
|
|
10-15-2010, 10:54 PM | #11 | |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
Quote:
And yes, it's awesome to have Ted 10 minutes away. I showed up at one today, he said go home and get your car, and by three I had the new rear, trailing arms and 1400 hp axles in and on the road. Oh yeah, he redid the trans tune. Sure made my life easier!! |
|
10-15-2010, 10:58 PM | #12 |
|
I see 9's for you next time at the track.
__________________
Jannetty Racing JRE Street Package
|
10-15-2010, 11:06 PM | #13 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
10-18-2010, 07:12 AM | #14 |
Drives: Nothing Fun. Join Date: Aug 2009
Location: CT
Posts: 1,052
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SS bumper cover installed on my 2LT/RS | 01pewterz28 | Cosmetics and Lighting Modification Discussions | 60 | 01-15-2015 03:57 PM |
Mindz' 2010 Supercharged SS detailed (pic heavy, no 56k) | gofast908z | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 30 | 05-27-2010 01:24 AM |
562 HP 2010 Camaro SS Supercharged Dyno Test | theshadow1234 | Camaro Photos | Spyshots | Video | Media Gallery | 12 | 05-11-2009 12:46 PM |