TR6060 M10 vs M9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

enroberts · 01-31-2018, 08:46 PM

Hey all. I'm getting ready to put a 2015 Z/28 TR6060 into my 2010 2SS. The stock 6060 broke the output shaft. Does anyone have a spec sheet showing differences between the 6060 that comes stock in the 2SS vs the 6060 from the Z/28? Thanks!

dreksnot · 01-31-2018, 09:03 PM

Never heard of her - M9 in Z/28?

Sorry, couldn't resist. Only 6-speeds for the TR6060. Output shafts in the 2010 were brittle. Best just to replace the output shaft in your current TR6060 and have fun.

enroberts · 01-31-2018, 09:05 PM

Quote:

Originally Posted by dreksnot

Never heard of her - M9 in Z/28?

Forget the RPO codes. OP edited. Now, can you help?

blake-b · 01-31-2018, 09:10 PM

My brief research indicates the Z/28 TR6060 has the same gear ratios as the ZL1
2012–2015 Chevrolet Camaro ZL1 2.66 1.78 1.30 1.00 0.80 0.63 2.90

Z/28 specs here

enroberts · 01-31-2018, 09:12 PM

Quote:

Originally Posted by dreksnot

Never heard of her - M9 in Z/28?

Sorry, couldn't resist. Only 6-speeds for the TR6060. Output shafts in the 2010 were brittle. Best just to replace the output shaft in your current TR6060 and have fun.

The 2010 6060 is gone. I have a brand 2015 Z/28 6060 going in soon. Yes, I know all the manual transmissions were 6 speeds. I was referring to the RPO codes between the SS and Z/28.

enroberts · 01-31-2018, 09:13 PM

Quote:

Originally Posted by blake-b

My brief research indicates the Z/28 TR6060 has the same gear ratios as the ZL1
2012–2015 Chevrolet Camaro ZL1 2.66 1.78 1.30 1.00 0.80 0.63 2.90

Z/28 specs here

Thanks

dreksnot · 01-31-2018, 09:13 PM

Do you mean MG9 TR6060?

enroberts · 01-31-2018, 09:15 PM

Quote:

Originally Posted by dreksnot

Do you mean MG9 TR6060?

Yep. Thanks

h018871 · 02-06-2018, 05:36 PM

My understanding is that the Z28 and 1LE have the same ratios. 5th & 6th are different from the ZL1.
5th: 0.74
6th: 0.50

ronchev · 02-10-2018, 04:58 PM

yes the Z/28 has .74/.50 5th/6th gears but there is advertising out there that says .80/.63 like the ZL1

I have both 2014 and 2015 Z/28 transmissions and both have .74/.50 5th/6th gears....

The ZL1 I had with .80/.63 gear set had a much more usable 5th/6th gears and didn't kill the rpm so bad..... maybe a change is in the works

01-31-2018, 08:46 PM	#1
enroberts Drives: 2010 Inferno Orange 2SS Camaro M6 Join Date: Jun 2012 Location: Parkesburg, PA Posts: 178	TR6060 M10 vs M9 Hey all. I'm getting ready to put a 2015 Z/28 TR6060 into my 2010 2SS. The stock 6060 broke the output shaft. Does anyone have a spec sheet showing differences between the 6060 that comes stock in the 2SS vs the 6060 from the Z/28? Thanks! __________________ LS3 \| Magnacharger 2300 supercharger \| ZL1 fuel pump \| FAST 65lb injectors \| 3.4" pulley \| JRE belt tensioner \| Elite RX clean/dirty side catch can system \| CAI \| Magnaflow Exhaust \| Monster Clutch LT-1S twin disc \| Tick remote clutch bleeder \| DSS Carbon Fiber DS \| DSS 9" rear with 3:70 Wavetrack gears \| DSS 1400HP axles \| Pegasus CNC stainless steel trailing/tow arms/solid subframe connectors \| Hurst short throw \| JBA mid pipes \| Bosch wide-band O2 sensor \| Innovate Motorsports LC02 wide band controller \| Innovate Motorsports Air/Fuel/boost gauges \| Baron Concepts center speaker gauge pod Last edited by enroberts; 01-31-2018 at 09:04 PM.

01-31-2018, 09:03 PM	#2
dreksnot Served USN - Atomic Chimp Drives: 13 Camaro LSX434 TT M6, 21 ZLE A10 Join Date: Jul 2012 Location: Fort Collins, CO Posts: 1,605 View My Garage	Never heard of her - M9 in Z/28? Sorry, couldn't resist. Only 6-speeds for the TR6060. Output shafts in the 2010 were brittle. Best just to replace the output shaft in your current TR6060 and have fun. __________________ In excess of 1,000WHP LSX434 \| AGP 65/65 TT \| BTR Equalizer Intake \| Trickflow 245cc cathedral \| BTR custom cam \| Cortex EBC \| n2mb WOT \| ID-1700x \| Brisk GR12S \| RPM Lv 7 TR6060 \| AGP's Triple 525LPH Fore Fuel \| Monster LT1-S Triple \| 4.11 DSS Proform 9", CF driveshaft, 1400hp axles \| Hurst Line Lock \| MGW Retro Short Throw w/old skool Hurst T-handle \| ADM solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Moreno camber/caster plates

01-31-2018, 09:13 PM	#7
dreksnot Served USN - Atomic Chimp Drives: 13 Camaro LSX434 TT M6, 21 ZLE A10 Join Date: Jul 2012 Location: Fort Collins, CO Posts: 1,605 View My Garage	Do you mean MG9 TR6060? __________________ In excess of 1,000WHP LSX434 \| AGP 65/65 TT \| BTR Equalizer Intake \| Trickflow 245cc cathedral \| BTR custom cam \| Cortex EBC \| n2mb WOT \| ID-1700x \| Brisk GR12S \| RPM Lv 7 TR6060 \| AGP's Triple 525LPH Fore Fuel \| Monster LT1-S Triple \| 4.11 DSS Proform 9", CF driveshaft, 1400hp axles \| Hurst Line Lock \| MGW Retro Short Throw w/old skool Hurst T-handle \| ADM solid subframe mounts \| Prothane Motor Mounts \| Revshift Poly Trans insert \| Moreno camber/caster plates

02-06-2018, 05:36 PM	#9
h018871 Geoff Drives: 2020 ZL1 Green Join Date: May 2013 Location: Houston Posts: 1,720	My understanding is that the Z28 and 1LE have the same ratios. 5th & 6th are different from the ZL1. 5th: 0.74 6th: 0.50 __________________ Having a Blast https://www.camaro6.com/forums/showt...php?p=10741733

01-31-2018, 09:10 PM	#4
blake-b Drives: 2009 ZR1 Join Date: May 2010 Location: KCMO Posts: 3,205	My brief research indicates the Z/28 TR6060 has the same gear ratios as the ZL1 2012–2015 Chevrolet Camaro ZL1 2.66 1.78 1.30 1.00 0.80 0.63 2.90 Z/28 specs here

02-10-2018, 04:58 PM	#10
ronchev Drives: 14' Red Z/28 #336 Join Date: Mar 2016 Location: Northen Indiana Posts: 367	yes the Z/28 has .74/.50 5th/6th gears but there is advertising out there that says .80/.63 like the ZL1 I have both 2014 and 2015 Z/28 transmissions and both have .74/.50 5th/6th gears.... The ZL1 I had with .80/.63 gear set had a much more usable 5th/6th gears and didn't kill the rpm so bad..... maybe a change is in the works