Race Wheel and Tires - Page 18 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Carlos_MRRWheelsInc · 07-22-2016, 01:56 PM

Quote:

Originally Posted by stratman2SSRS

I just got my new 18" MRR wheels in yesterday.
They fit perfect with the Mickey Thompsons.
Can't wait to get to the track to try them out.
I also ordered a full set of 20" for daily driving, they should be in soon.

Oh man looking real good !!!! cant believe I almost missed this.
Oh by the way your 20" are getting shipped out to Simply Tire today

flyer08 · 07-27-2016, 09:05 PM

Quote:

Originally Posted by Pro Stock John

I have some folks running 17's Flyer.

What's your opinion of running them? Trying to decide between the 17x9.5 or 18x10.5.

stratman2SSRS · 08-15-2016, 08:29 PM

Here are a couple of pics of the MMR fs01's in 18" on the rear with Mickey Thompson Street ET's.
And one of me doing a 1/2 mile event in the rain!!!

I also had them make me a pair of 20" for the rears for the daily driving.

I will try to get some better pictures later.

redirish · 08-25-2016, 12:27 PM

I have a 2010 M6 with all the BMR suspension upgrades the ZL1 373 vortech v3 street slayer carbon dual putting down 610 rwhp

From the research I have done looks like bias ply slicks r the best way to go to get any kind of consistent launches. Before I make the move does anyone with a modified M6 have any other opinions

ClarityCamaro · 09-06-2016, 06:54 AM

I'm in the same boat.... I'm thinking for my m6 I was going to buy some welds 17'' s76b welds with the 17x10 bias ply slick I believe it's rated at 28 inches tall. But it looks like they won't fit on 13 zl1's?! Can someone confirm before I purchase thanks!

Pro Stock John · 09-06-2016, 09:06 PM

Max effort stick shift guys might run best with slicks. Kinda depends on some things.....

1QwkSS · 10-07-2016, 09:10 AM

Name: IMG_0328.jpg
Views: 1658
Size: 161.9 KB

Alright just real quick...the c5z wheels factory gm 18x10.5" DO or DO NOT fit the rear of these vehicles without a spacer? Ran through this thread and didn't see a definitive answer

760bowtie · 10-27-2016, 09:59 PM

I got some 18x8 zl1 replicas for my front wheels. What is the thinnest tires I can run on those?

Mkn95u0 · 11-29-2016, 05:29 PM

Does anyone know what the proper offset would be for Welds RT-S 18x10.5 & 18x8's would be?

GoldCartridgeGamer · 11-29-2016, 08:54 PM

Quote:

Originally Posted by Mkn95u0

Does anyone know what the proper offset would be for Welds RT-S 18x10.5 & 18x8's would be?

Weld fitment guide located at http://weldwheels.com/wheel-tech/#applications might be helpful.

Direct link for our cars: http://weldwheels.com/wp-content/upl...tion-Guide.pdf

Mkn95u0 · 12-01-2016, 01:17 PM

Quote:

Originally Posted by Lgndryhr

Weld fitment guide located at http://weldwheels.com/wheel-tech/#applications might be helpful.

Direct link for our cars: http://weldwheels.com/wp-content/upl...tion-Guide.pdf

Thank you!

TrickRacin · 02-07-2017, 01:43 PM

Is there a part number for the RSI 17x9.5's and 17x10.5's? I keep getting different numbers from different sources?

enroberts · 02-24-2017, 10:14 AM

Any concerns with reproduction Corvette wheels breaking under torque stress with DR and 600rwhp?

Pro Stock John · 02-24-2017, 01:34 PM

I would not be worried about that. They are a cast wheel and so are our stock ones.

08-15-2016, 08:29 PM	#241
stratman2SSRS Drives: Lingenfelter Camaro Join Date: Apr 2009 Location: Ontario Posts: 2,160 View My Garage	Here are a couple of pics of the MMR fs01's in 18" on the rear with Mickey Thompson Street ET's. And one of me doing a 1/2 mile event in the rain!!! I also had them make me a pair of 20" for the rears for the daily driving. I will try to get some better pictures later. Attached Images __________________

09-06-2016, 09:06 PM	#244
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Max effort stick shift guys might run best with slicks. Kinda depends on some things..... __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

10-27-2016, 09:59 PM	#246
760bowtie Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014 Location: Oceanside, CA Posts: 1,487	I got some 18x8 zl1 replicas for my front wheels. What is the thinnest tires I can run on those? __________________ AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6

11-29-2016, 05:29 PM	#247
Mkn95u0 Drives: 2012 IBM L99 Join Date: Feb 2012 Location: Southern California Posts: 484 View My Garage	Does anyone know what the proper offset would be for Welds RT-S 18x10.5 & 18x8's would be? __________________ Robert 12.012 @ 115.75mph DA: 2371 \| 486rwhp/467rwtq (11/8/2015)M 11.265 @ 123.55mph DA: 2318 \| 526rwhp/532rwtq (11/19/2016)M 10.722 @ 132.21mph DA: 850 \| 645rwhp/581rwtq (12/3/2017)M 10.609 @ 130.19 DA: 975 \| 675rwhp/629rwtq (2/16/2020)D Build: E-Force w/ 3.25" pulley (11lbs of boost), 10% OD under pulley, Fore Dual Fuel System, ID850's, AEM CAI, Borla Long Tubes, Flowmaster Super 10's, Circle D 3200 converter 258mm triple disc lockup, cam 226/242 116+4 LSA, ZL-1 Rear end, E85 & BRC Raceworks Tune (previously known as CMS) Youtube Channel: http://www.youtube.com/c/RobertMitchellRCM

02-07-2017, 01:43 PM	#250
TrickRacin Drives: 2011 2SS/RS Join Date: Aug 2014 Location: Marion Iowa Posts: 60	Is there a part number for the RSI 17x9.5's and 17x10.5's? I keep getting different numbers from different sources? Last edited by TrickRacin; 02-07-2017 at 09:57 PM.

08-25-2016, 12:27 PM	#242
redirish Drives: 10' IOM 2SS/RS/M6 Join Date: Sep 2009 Location: New Jersey Posts: 1,354 View My Garage	I have a 2010 M6 with all the BMR suspension upgrades the ZL1 373 vortech v3 street slayer carbon dual putting down 610 rwhp From the research I have done looks like bias ply slicks r the best way to go to get any kind of consistent launches. Before I make the move does anyone with a modified M6 have any other opinions

09-06-2016, 06:54 AM	#243
ClarityCamaro Drives: 2013 black zl1 Join Date: Nov 2013 Location: Lubbock Posts: 696	I'm in the same boat.... I'm thinking for my m6 I was going to buy some welds 17'' s76b welds with the 17x10 bias ply slick I believe it's rated at 28 inches tall. But it looks like they won't fit on 13 zl1's?! Can someone confirm before I purchase thanks!

10-07-2016, 09:10 AM	#245
1QwkSS Drives: 2012 Camaro 1SS M6 Join Date: Sep 2014 Location: Spring Hill, FL Posts: 184	Alright just real quick...the c5z wheels factory gm 18x10.5" DO or DO NOT fit the rear of these vehicles without a spacer? Ran through this thread and didn't see a definitive answer

02-24-2017, 10:14 AM	#251
enroberts Drives: 2010 Inferno Orange 2SS Camaro M6 Join Date: Jun 2012 Location: Parkesburg, PA Posts: 178	Any concerns with reproduction Corvette wheels breaking under torque stress with DR and 600rwhp? __________________ LS3 \| Magnacharger 2300 supercharger \| ZL1 fuel pump \| FAST 65lb injectors \| 3.4" pulley \| JRE belt tensioner \| Elite RX clean/dirty side catch can system \| CAI \| Magnaflow Exhaust \| Monster Clutch LT-1S twin disc \| Tick remote clutch bleeder \| DSS Carbon Fiber DS \| DSS 9" rear with 3:70 Wavetrack gears \| DSS 1400HP axles \| Pegasus CNC stainless steel trailing/tow arms/solid subframe connectors \| Hurst short throw \| JBA mid pipes \| Bosch wide-band O2 sensor \| Innovate Motorsports LC02 wide band controller \| Innovate Motorsports Air/Fuel/boost gauges \| Baron Concepts center speaker gauge pod

02-24-2017, 01:34 PM	#252
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	I would not be worried about that. They are a cast wheel and so are our stock ones. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800