A Little DIY Project (updated, see post #17) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TheInfamouSS · 04-26-2018, 05:37 AM

Quote:

Originally Posted by olblue75

The guy that made/makes them is still pretty active of a couple of 5th Gen Camaro FB Pages.

I am not said guy but I can confirm that Camaro 5th Generation or Camaro 1LE Facebook page will definitely help you find who you're looking for. Just look for a guy named Dalton. Wouldn't be hard to find. Cool guy.

OP the work you did came out great by the way! Love DIY projects.

Mr2Hard2See · 04-26-2018, 10:45 AM

Nice job on that man.

Welker2 · 06-07-2018, 05:28 PM

After making and installing the cover I had two issues; both of which were resolved today. The first was that the hood support was hitting the back edge on the right side. The other was it had an unfinished look. So I ordered some edge trim, which came in today and trimmed/reshaped the back right edge. Fits much better and, IMO, looks a lot better as well.

DBHWT · 06-07-2018, 07:04 PM

You did a good job !!!!!

silversleeper · 06-07-2018, 07:32 PM

Seeing the look on the rats faces when you remove their carbon fiber roof this winter - priceless

Looks good. I prefer going in the opposite direction. I'd love see thru rocker covers and windows in the block and moving parts. See thru blower cover

theflea42 · 06-07-2018, 09:38 PM

Where did you get that edge trim?

Welker2 · 06-07-2018, 09:44 PM

Quote:

Originally Posted by theflea42

Where did you get that edge trim?

Amazon 25' for $20 (link below). Only needed less then 3ft, but it was the shortest length they had, so now I have plenty left for other projects

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

04-26-2018, 10:45 AM	#16
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	Nice job on that man.

06-07-2018, 05:28 PM	#17
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	After making and installing the cover I had two issues; both of which were resolved today. The first was that the hood support was hitting the back edge on the right side. The other was it had an unfinished look. So I ordered some edge trim, which came in today and trimmed/reshaped the back right edge. Fits much better and, IMO, looks a lot better as well. Attached Images __________________

06-07-2018, 07:04 PM	#18
DBHWT Drives: 2013 SS 1LE Join Date: Nov 2011 Location: Cincinnati / N KY area Posts: 559	You did a good job !!!!!

06-07-2018, 07:32 PM	#19
silversleeper Big Crow Drives: '13 ZL1 Join Date: Mar 2017 Location: California Posts: 1,486	Seeing the look on the rats faces when you remove their carbon fiber roof this winter - priceless Looks good. I prefer going in the opposite direction. I'd love see thru rocker covers and windows in the block and moving parts. See thru blower cover

06-07-2018, 09:38 PM	#20
theflea42 #938 of 1524 Drives: 2013 Hot Wheels Edition Camaro Join Date: Mar 2017 Location: West Virginia Posts: 182	Where did you get that edge trim?