05-03-2016, 09:34 AM | #1 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
FS:Hotchkis Lowering Springs, Front and Rear
For sale: Hotchkis Lowering Springs (front and rear) used.
1 INCH DROP... LOOKS REAL GOOD ON THE CAMARO. looking to move these... $125.00 $250 brand new. WOULD PREFER LOCAL PICK UP TO 08730 Features: •1" Lowered Stance •Higher Performance Rates, Front 210lbs/in, Rear 440 lbs/in •Cold wound high tensile steel for strength. •Durable powder coat finish. Benefits: •Sleek, lowered stance. •Dramatically improved handling and control •Sporty, yet comfortable ride •Bolt-In installation requires no vehicle modifications. •Designed to work with factory struts. Note: Springs will fit both V6 and V8 Models
__________________
To Be Continued
Last edited by JTC/C5; 05-06-2016 at 09:34 AM. |
05-03-2016, 09:43 AM | #2 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
Stock springs
__________________
To Be Continued
|
05-03-2016, 09:44 AM | #3 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
After ... 1 inch drop w/ hotchkis springs .. Much better stance
Features: •1" Lowered Stance •Higher Performance Rates, Front 210lbs/in, Rear 440 lbs/in •Cold wound high tensile steel for strength. •Durable powder coat finish. Benefits: •Sleek, lowered stance. •Dramatically improved handling and control •Sporty, yet comfortable ride •Bolt-In installation requires no vehicle modifications. •Designed to work with factory struts. Note: Springs will fit both V6 and V8 Models
__________________
To Be Continued
Last edited by JTC/C5; 05-06-2016 at 09:34 AM. |
05-04-2016, 05:10 PM | #4 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
drop it...
__________________
To Be Continued
|
05-04-2016, 05:38 PM | #5 |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
I have HOTCHKIS! I have no complaints and haven't heard anything bad about them.
|
05-04-2016, 06:27 PM | #6 |
S1N1STR
|
Are they difficult to install?
|
05-04-2016, 07:03 PM | #7 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
Well I had someone install mine ... So not sure how mechanically inclined you are but I'm sure it could be done
__________________
To Be Continued
|
05-04-2016, 07:06 PM | #8 | |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
Quote:
Front and rear sways Strut tower brace Springs Subframe connector And all hardware in on shot Car handled awesome now added Coilovers , car handles like its on rails
__________________
To Be Continued
|
|
05-05-2016, 09:56 AM | #9 |
Drives: 2010 Camaro SS Join Date: Jun 2015
Location: Missouri
Posts: 159
|
Did you require an alignment after install?
|
05-05-2016, 11:11 AM | #10 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
I probably did get one.
__________________
To Be Continued
|
05-06-2016, 08:16 AM | #11 |
Do you have a part number on the springs ? Thanks !
|
|
05-06-2016, 09:35 AM | #12 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
HOT19110
Features: •1" Lowered Stance •Higher Performance Rates, Front 210lbs/in, Rear 440 lbs/in •Cold wound high tensile steel for strength. •Durable powder coat finish. Benefits: •Sleek, lowered stance. •Dramatically improved handling and control •Sporty, yet comfortable ride •Bolt-In installation requires no vehicle modifications. •Designed to work with factory struts. Note: Springs will fit both V6 and V8 Models
__________________
To Be Continued
|
05-07-2016, 11:32 PM | #13 |
Would you be willing to ship?
|
|
05-08-2016, 05:40 AM | #14 |
Drives: 2010 2SS L99 Join Date: Apr 2010
Location: nj
Posts: 395
|
yes , buyer pays full shipping , no problem
__________________
To Be Continued
|
|
|
|
|