Th400 fixed or slip yoke - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010_camaro · 11-17-2018, 08:52 PM

What's the one to go with?

My other post was deleted it seems.

2010_camaro · 11-18-2018, 09:28 PM

Nuffin?

Bo White · 11-19-2018, 07:29 AM

I run slip yoke on the factory driveshaft

MoeIv · 11-19-2018, 01:10 PM

I run a slip yoke on the DSS driveshaft

2010_camaro · 11-21-2018, 07:36 PM

Dish flex plate or flat flex plate?
Crank spacer or no spacer?
Torque converter centering ring or no ring?

Bo White · 11-22-2018, 02:15 AM

I run a TCI flexplate
My first stall was built for LS swap and didnt need a crank adaptor. My current one did need one.

2010_camaro · 11-28-2018, 05:14 PM

Quote:

Originally Posted by Bo White

I run a TCI flexplate
My first stall was built for LS swap and didnt need a crank adaptor. My current one did need one.

So if I run a order th400 stall I'll only need the adapter?

Bo White · 11-29-2018, 12:39 AM

Yes. Im running the older style stall and a crank adaptor.

11-17-2018, 08:52 PM	#1
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	Th400 fixed or slip yoke What's the one to go with? My other post was deleted it seems. __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

11-18-2018, 09:28 PM	#2
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	Nuffin? __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

11-21-2018, 07:36 PM	#5
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	Dish flex plate or flat flex plate? Crank spacer or no spacer? Torque converter centering ring or no ring? __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

11-19-2018, 07:29 AM	#3
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	I run slip yoke on the factory driveshaft

11-19-2018, 01:10 PM	#4
MoeIv Drives: IOM 2SS/RS Join Date: Dec 2011 Location: Qatar Posts: 702	I run a slip yoke on the DSS driveshaft

11-22-2018, 02:15 AM	#6
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	I run a TCI flexplate My first stall was built for LS swap and didnt need a crank adaptor. My current one did need one.

11-29-2018, 12:39 AM	#8
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	Yes. Im running the older style stall and a crank adaptor.