Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Garage / Tools Discussions


Reply
 
Thread Tools
Old 06-20-2013, 07:59 PM   #1
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
Garage Floor

Well some new BFGs (all terrains on my truck) pulled up a few small sections of the painted garage floor so I decided to patch, clean, repaint, and clear coat. Also patched a few chips that occourred over the last few years from dropping tools and such. So far half of the garage is completed. Just thought I would share photos. The rustoleum professional garage floor paint and clear coat is a nice system. The cones are to remind my wife and 3 yr old to stay off that side
Attached Images
  
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
Old 06-20-2013, 10:57 PM   #2
Jmar
 
Drives: 2012 LS3 CRM, V8 Healey, Mini
Join Date: Jun 2012
Location: MI
Posts: 103
I used the same system. The clear really makes it pop. How did you prep the old painted surface? Mine's starting to pull up a little at the tires too.
Jmar is offline   Reply With Quote
Old 06-21-2013, 12:23 AM   #3
Casperadub70

 
Casperadub70's Avatar
 
Drives: 2014 1LE Camaro, 95 Z28 Camaro
Join Date: Jun 2011
Location: America
Posts: 940
where did you get this set up
__________________
2014 1LE 2SS Camaro Recaro seats, Custom Cam, Kooks LT headers, CAI intake, Z/28 Spoiler, Z/28 Belly Pan, Z/28 Brake Air Ducts, Stainless Steel breaklines, BMR Toe Rods and Trailing Arms resulting in 482.49 RWHP
Casperadub70 is offline   Reply With Quote
Old 06-21-2013, 12:33 AM   #4
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
Quote:
Originally Posted by Casperadub70 View Post
where did you get this set up
Menards
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
Old 06-21-2013, 03:57 AM   #5
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
Quote:
Originally Posted by Jmar View Post
I used the same system. The clear really makes it pop. How did you prep the old painted surface? Mine's starting to pull up a little at the tires too.
Basically I got up as much loose stuff as I could (using a scraper) and then applied the rustoelum epoxy patch to those ares. I then sanded the epoxy patch cleaned and painted over.
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
Old 06-21-2013, 07:07 AM   #6
880
 
880's Avatar
 
Drives: 2011 Z06, 2004 Cobra, 1991 MR2Turbo
Join Date: Dec 2011
Location: Delaware
Posts: 472
How long have you had your setup?

I'm worried about painting and then peeling.
__________________
880 is offline   Reply With Quote
Old 06-21-2013, 03:46 PM   #7
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
3 yrs no peeling until new tires. I now use some plastic floor tiles to park on so it won't pickup the paint

I will post pics of these later


Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
Old 06-21-2013, 04:14 PM   #8
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
Pics of floor tiles




Ryan
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
Old 09-07-2013, 04:36 AM   #9
EOD
 
EOD's Avatar
 
Drives: 1968 Camaro SS & 2015 GMC Sierra De
Join Date: Nov 2012
Location: Camp Lejeune, NC
Posts: 94
How does the clear deal with fuel. I have the Armor Coat brand on my floor and it doesnt fair so well. I changed out my fuel pump and spilled a little on it and ruined the clear coat. I wiped it away which spread it and made it worse, looks pretty bad.
__________________
Whipple SC, Lingenfelter Heads & Cam, ACT Twin Disc Clutch, Rotofab CAI, JBA 1 7/8" Long Tube Headers & 3" Exhaust, Livernois Motorsports Fuel Pump, DSS 1400Hp Axles
RWHP 660
RWTQ 618 SOLD
EOD is offline   Reply With Quote
Old 09-07-2013, 06:55 AM   #10
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2018 Hyper Blue 1SS 1LE
Join Date: Jul 2011
Location: Brownsburg, Indiana
Posts: 6,231
on mine it wipes right up. I have spilled some while filling the mower
__________________
Ryan
* 2018 1SS 1LE Camaro Hyper Blue Metallic
Car Build: http://www.camaro6.com/forums/showth...0#post10049680
Ryanbabz71 is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.