Greg Good ported LS3 heads - NEW, uninstalled, COMPLETE with upgraded springs, etc - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RideZX6R · 01-06-2015, 03:54 PM

SOLD

cc-rider · 01-06-2015, 07:25 PM

What is the improvement on CFM as compared to stock from this porting?

RideZX6R · 01-06-2015, 10:57 PM

Quote:

Originally Posted by cc-rider

What is the improvement on CFM as compared to stock from this porting?

I'd say search for a stock flow bench chart and compare it.

The difference isn't small, however I don't have a stock flow bench chart handy as I'm on my phone

Bo White · 01-07-2015, 12:49 AM

If they were ported by Greg I wouldn't be too concerned about the #s.

djpelosi · 01-07-2015, 09:46 AM

About how much rwhp over stock would this make?

RideZX6R · 01-07-2015, 11:44 PM

Quote:

Originally Posted by Bo White

If they were ported by Greg I wouldn't be too concerned about the #s.

I would agree. I didn't ask about the numbers much because I knew who Greg was... I didn't realize not everyone does :(
He's very well known in the Viper and LS communities

Quote:

Originally Posted by djpelosi

About how much rwhp over stock would this make?

Depends on other mods honestly. 20-40whp on N/A car, perhaps more with a blower.

flht99b · 01-08-2015, 10:41 AM

May be interested. Have the heads been milled ?? Would be interested in swapping my low mileage LS3 heads. PM me.
Ed M.

RideZX6R · 01-08-2015, 01:35 PM

Sent a PM.
Thanks

1sick_eg · 01-08-2015, 01:59 PM

Stock powdered valve guides?

RideZX6R · 01-08-2015, 04:25 PM

Quote:

Originally Posted by 1sick_eg

Stock powdered valve guides?

Bronze guides IIRC

RideZX6R · 01-09-2015, 01:12 PM

bump

RideZX6R · 01-12-2015, 03:33 PM

updated info

RideZX6R · 01-13-2015, 12:42 PM

bump!

RideZX6R · 02-04-2015, 01:34 AM

top!

01-06-2015, 03:54 PM	#1
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	Greg Good ported LS3 heads - NEW, uninstalled, COMPLETE with upgraded springs, etc SOLD Last edited by RideZX6R; 02-12-2015 at 03:04 PM.

01-07-2015, 12:49 AM	#4
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,018	If they were ported by Greg I wouldn't be too concerned about the #s. __________________ Retired wanna be cylinder head porter 2015 2SS 1LE Clutch reservoir, Vararam DRX, ported TB, TSP 2" headers, MGW shifter Totalled: 2010 1SS Wilkes Performance/Eagle 416 shortblock, TSP custom valvetrain, PRC 260 heads, Edelbrock Pro Flo 102, th400 swap, 8" PTC 5500 stall= 535/435 at the wheels tuned Gen 3 Performance and Dyno 10.97 @ 124 full weight in 3100 DA CamaroFest X

01-07-2015, 09:46 AM	#5
djpelosi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2012 Location: Cordova, TN Posts: 774	About how much rwhp over stock would this make? __________________ 2010 Camaro 2SS M6 2" Stainless Power Longtube Headers 3" Full exhaust w/ Off-Road H-Pipe Bo White Ported Throttle Body Hurst Short Throw Shifter Best Time: 12.43 @ 114, 1.99 60' on stock wheels and stock tires Build Thread

01-08-2015, 10:41 AM	#7
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	May be interested. Have the heads been milled ?? Would be interested in swapping my low mileage LS3 heads. PM me. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

01-08-2015, 01:59 PM	#9
1sick_eg Drives: 14 Camaro 1LE,328i, and some Hondas Join Date: May 2014 Location: Virginia Posts: 799	Stock powdered valve guides? __________________ 14' Camaro 1LE - Now self-tuned FRH ported heads, Cam Motion LL solid roller, Jesel rockers, Morel lifters, Kooks headers, Corsa exhaust, ADM intake, Stock compression/bore/stroke 551whp 504wtq

01-06-2015, 07:25 PM	#2
cc-rider Drives: 2010 Camaro SS Join Date: Dec 2006 Location: MN Posts: 1,172	What is the improvement on CFM as compared to stock from this porting?

01-08-2015, 01:35 PM	#8
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	Sent a PM. Thanks

01-09-2015, 01:12 PM	#11
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	bump

01-12-2015, 03:33 PM	#12
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	updated info

01-13-2015, 12:42 PM	#13
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	bump!

02-04-2015, 01:34 AM	#14
RideZX6R Probably tired right now Drives: 1Lap1LE \| EV6 FE \| 18 F150 Join Date: Sep 2010 Location: At the office (CLT, NC) Posts: 1,133	top!