HPE550 Mail-Order Thoughts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

cannondalerider · 08-16-2009, 02:28 AM

So as i sit here waiting for my car to come (who knows when) I am beginning to think I'm crazy. I haven't even driven the LS3 yet but I already want more. My original plan was to put 10K down and finance the rest to help get approved for a loan (1st). That apparently isn't gonna happen and I'm getting co-signed so I don't feel like I really need to put that much down. I'm now thinking of putting down maybe 15% and buying the Mail Order HPE550 kit from Hennessey (I don't really care about rims and stickers and can figure out suspension upgrades later).

Here are my pros to going HPE550 Mail Order:
Engineered by an outstanding company.
Using awesome parts many would otherwise buy alone.
3/36000 mile warranty (engine only/powertrain? That would be good to know).
All-in-one package so it'll work well, proven #'s.
Insane power while maintaining it ability to be a daily driver.

Cons:
More expensive than buying components only (but you get a warranty).
Is it too much power for street?
???

Now as far as install goes, I can't find anyone on this forum who has done the HPE kit themselves (although there are maggie installs). Now I've worked on all sorts of vehicles from a 1:10 scale nitro RC, quads and bikes, Mazda6 bolt-ons and I do work as an Apple Genius so I spend about 20 hours a week turning screws. I know my welding is weak so I would have a shop do the catback, but everything else should be manageable with some hand-tools, Dos Equis and an afternoon, right?

I hope this isn't too long, but I think I need some guidance from others who have either the HPE550 or just other Camaro nuts. If I do go with the kit it is definitely gonna suck up my mod money for several months but I guess I'm trying to decide if its gonna be a wise choice.

Ltdodge · 08-16-2009, 09:40 AM

its your coin...but you can also go with a magnusun blower or vortec and you can purchase a 3yr 36k mile warranty also from them.....

maybe that route would be cheaper, look around..
another thing just google the vendors name with BBB and look at other forums and make sure you are happy to purchase from a reputable company......

there are many vendors selling a bunch of stuff, you just gotta look out for your interst and your money

chevyboy221 · 08-16-2009, 07:51 PM

get ahold of andy at admperformance he will hook you up and it will prob be less money!!!

jrpxxii · 08-16-2009, 08:14 PM

I went with the same dilemma and ended up buying each piece individually and saved thousands. They want nearly $8k for labor and I can have it done for around $2500 and that is putting a cam in also. You are paying for their name and they use products you can buy from alot of guys on this forum. Just my 2 cents.

Kris@BMCPerformance · 08-16-2009, 08:21 PM

Google is your friend...that is all I will say!

Crowley · 08-16-2009, 08:57 PM

Quote:

Originally Posted by chevyboy221

get ahold of andy at admperformance he will hook you up and it will prob be less money!!!

He is starting my install this week .. I vote for Andy at ADM as well

JJ2010 · 08-16-2009, 09:16 PM

RPM in Garner,NC is doing a MagnaCharger TVS-2300 install,new thermostat,new plugs and wires,and dyno tune on engine and Transmission for $7600.00 out the door......

08-16-2009, 02:28 AM	#1
cannondalerider LSWEE Drives: CGM LS3 2SS/RS Join Date: Mar 2007 Location: Peoria, AZ Posts: 85	HPE550 Mail-Order Thoughts So as i sit here waiting for my car to come (who knows when) I am beginning to think I'm crazy. I haven't even driven the LS3 yet but I already want more. My original plan was to put 10K down and finance the rest to help get approved for a loan (1st). That apparently isn't gonna happen and I'm getting co-signed so I don't feel like I really need to put that much down. I'm now thinking of putting down maybe 15% and buying the Mail Order HPE550 kit from Hennessey (I don't really care about rims and stickers and can figure out suspension upgrades later). Here are my pros to going HPE550 Mail Order: Engineered by an outstanding company. Using awesome parts many would otherwise buy alone. 3/36000 mile warranty (engine only/powertrain? That would be good to know). All-in-one package so it'll work well, proven #'s. Insane power while maintaining it ability to be a daily driver. Cons: More expensive than buying components only (but you get a warranty). Is it too much power for street? ??? Now as far as install goes, I can't find anyone on this forum who has done the HPE kit themselves (although there are maggie installs). Now I've worked on all sorts of vehicles from a 1:10 scale nitro RC, quads and bikes, Mazda6 bolt-ons and I do work as an Apple Genius so I spend about 20 hours a week turning screws. I know my welding is weak so I would have a shop do the catback, but everything else should be manageable with some hand-tools, Dos Equis and an afternoon, right? I hope this isn't too long, but I think I need some guidance from others who have either the HPE550 or just other Camaro nuts. If I do go with the kit it is definitely gonna suck up my mod money for several months but I guess I'm trying to decide if its gonna be a wise choice. __________________ 1100 - Preliminary Order Accepted (7-22-09) 2000 - Accepted by GM (9-10-09) 3000 - Accepted by Production Control (9-11-09) 3300 - Scheduled for Production (9-21-09) 3400 - Broadcast (Being Built) (9-24-09) (9-28-09) 3800 - Produced (10-1-09) 2G1FT1EW6A9151459 4200 - Shipped (10-1-09) (in Calumet City, IL as of 10/3/09 7:00am) Last edited by cannondalerider; 08-16-2009 at 02:43 AM.

08-16-2009, 09:40 AM	#2
Ltdodge Drives: 2008 Z06 Join Date: Apr 2009 Location: Oviedo, Florida Posts: 891	its your coin...but you can also go with a magnusun blower or vortec and you can purchase a 3yr 36k mile warranty also from them..... maybe that route would be cheaper, look around.. another thing just google the vendors name with BBB and look at other forums and make sure you are happy to purchase from a reputable company...... there are many vendors selling a bunch of stuff, you just gotta look out for your interst and your money __________________

08-16-2009, 08:21 PM	#5
Kris@BMCPerformance Drives: 2006 Charger SRT8-Supercharged Join Date: Jul 2009 Location: West Palm Beach, Fl Posts: 271	Google is your friend...that is all I will say! __________________ BMC Performance-Forced Induction Specialists www.BMCPerformance.com 877-BMC-RWHP Vortech, Techco, Procharger, STS Turbo, Magnacharger Dealer/Installer!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Did you get an order # or any refernce for your pre-order?	D1BADZ	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	21	05-22-2009 05:39 PM
Camaro Order / Dealer Feelgood Story	RPO_Z28	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	7	04-11-2009 02:47 PM
Just got a 4800 Event Code from Dealer	speedster	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	29	04-09-2009 08:49 PM
order being pulled = what event code #?	SGOS252382	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	4	03-28-2009 01:17 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 12:31 AM

08-16-2009, 07:51 PM	#3
chevyboy221 Drives: 2015 SS L99 Join Date: Aug 2009 Location: Sarasota FL Posts: 67	get ahold of andy at admperformance he will hook you up and it will prob be less money!!!

08-16-2009, 08:14 PM	#4
jrpxxii Drives: 2010 Camaro SS/RS 427ci Join Date: Jul 2009 Location: Bowling Green, Ky Posts: 3,355	I went with the same dilemma and ended up buying each piece individually and saved thousands. They want nearly $8k for labor and I can have it done for around $2500 and that is putting a cam in also. You are paying for their name and they use products you can buy from alot of guys on this forum. Just my 2 cents.

08-16-2009, 09:16 PM	#7
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,203	RPM in Garner,NC is doing a MagnaCharger TVS-2300 install,new thermostat,new plugs and wires,and dyno tune on engine and Transmission for $7600.00 out the door......