12-26-2018, 07:34 PM | #1 |
Drives: 2010 Camaro SS A6 Join Date: Oct 2018
Location: Brighton, MI
Posts: 183
|
Vararam Ram Air Induction System
Vararam Ram Air Induction System part #937-VR-Camaro (only saw it on Jegs)
$369 I just came across this. I know in the past I've read about this intake for Corvettes. Supposed to get nearly double the HP/TQ on Camaros vs most CAIs. Anybody familiar with this??? |
12-26-2018, 09:41 PM | #2 |
Drives: 13' 1LE Join Date: Apr 2012
Location: Canada
Posts: 2,642
|
I have it. No difference felt from my Haltech. Its a nice setup that looks very efficient. I mean..its not like your gonna gain 15-25hp over another setup.
__________________
13' 1LE
Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me. |
12-26-2018, 09:50 PM | #3 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Vararam Ram Air Induction System
I have the Vararam intake and it’s definitely an upgrade over the K&N air intake I had. I went with the tune model and even got it dynoed after the install. This was awhile ago. Here’s the dyno sheet.... it barely picked up up hp, but torque it gained almost 20 to the wheels! Humidity and temp could have affected it as well, but still happy with the torque it made. Worth the upgrade! Cleaning it is the only pain haha. This is from awhile ago.
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
12-27-2018, 12:11 PM | #4 |
Drives: 2018 Camaro ZL1 A10 Join Date: Nov 2018
Location: West Chester, PA
Posts: 462
|
they are good intakes and make good power. We sell them here (and are cheaper)-
2010-2011 - https://www.cspracing.com/vararam-ra...vr-ss-no-tune/ 2012-2015 - https://www.cspracing.com/vararam-dr...-2l-v8/vr-drx/ |
12-28-2018, 06:31 PM | #5 |
Drives: 2015 camaro 2ss, 87 monte ss Join Date: Jun 2016
Location: Houston
Posts: 242
|
It's worth it in my opinion. Between the DRX for my 2015 L99 and the solo HF Cats and catback it made a very noticeable difference! It had a hard time sliding the rear end out before I did the mods. Just did the Solo HF cats today and it is even more noticeable than the vararam imo. Between the 2 mods I wouldn't be surprised if it puts down 20-25 more rwhp.
It's that significant just those two mods. I can only imagine what a tune will do to it. |
12-28-2018, 07:54 PM | #6 |
Drives: 2013 2SS/RS Join Date: Nov 2015
Location: Barrie, Ontario
Posts: 598
|
https://www.lmperformance.com/827867...on-system.html
Cheapest place I've found for the kit (where I got mine). I contacted all the vendors on the site and none could match the price. Sorry yours is a 2010. Same place good price. https://www.lmperformance.com/559760...8-no-tune.html |
12-28-2018, 07:57 PM | #7 | |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Quote:
That’s a different air intake by then than the one the OP and every one else is talking about
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
|
12-28-2018, 08:01 PM | #8 |
Drives: 2013 2SS/RS Join Date: Nov 2015
Location: Barrie, Ontario
Posts: 598
|
|
|
|
|
|