Glassskinz - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

davesnever · 03-01-2018, 09:57 PM

Quote:

Originally Posted by alssiri

This is my car

Ahmad

Very nice car, love the paint scheme!

davesnever · 03-01-2018, 10:04 PM

Quote:

Originally Posted by Jus1dab

Not feeling that............

Yeah I watched the install on their website and it mounts with double sided tape so I guess it's a pain to clean the glass and I still don't like the look or the fact that the company's name is stamped into it in huge letters. Looks ok on a mustang as it seems to follow the theme of the tail lights.

Rahnok · 03-01-2018, 10:52 PM

If you want to buy these, you can get 15% off using the code “PRIME5” on

http://d2bdmotorwerks.com/i-23892657...kinz%26go%3DGo

alssiri · 03-02-2018, 12:46 AM

Quote:

Originally Posted by Elvis66

Your looks amazing!!

Are thoes z28 fenders flares?

Thanks , yes they are Z28 fender flares.

Ahmad

orange devil · 03-02-2018, 09:13 AM

Quote:

Originally Posted by alssiri

Thanks , yes they are Z28 fender flares.

Ahmad

You did a really good job and integrating them with the ZL1 front bumper cover .was there much that you had to do to modify it to fit?.

alssiri · 03-02-2018, 09:54 AM

Quote:

Originally Posted by Elvis66

You did a really good job and integrating them with the ZL1 front bumper cover .was there much that you had to do to modify it to fit?.

Just had to fabricate the circled piece to flush with the lower fascia.

Ahmad

hammdo · 03-02-2018, 10:21 AM

Quote:

Originally Posted by davesnever

Yeah I watched the install on their website and it mounts with double sided tape so I guess it's a pain to clean the glass and I still don't like the look or the fact that the company's name is stamped into it in huge letters. Looks ok on a mustang as it seems to follow the theme of the tail lights.

I was thinking the same, how do you clean the glass if it's taped on? Not for me but look good in some of those pics...

-Don

alssiri · 03-04-2018, 01:52 AM

Quote:

Originally Posted by hammdo

I was thinking the same, how do you clean the glass if it's taped on? Not for me but look good in some of those pics...

-Don

Using a cloth through the opening even though it does get dirty that much.

Ahmad

TheFlyingBananaSS · 03-04-2018, 05:51 AM

Jake90195 · 03-04-2018, 03:39 PM

Badass and looks good but pricey for a rear window louver. On a side note don't buy anything from ikon. Their products my be cheaper but they are knockoffs. A lot of people complain about improper fitment, warping parts, pre painted parts by them aren't properly prepared or primed so paint flakes and comes off. They are a company out of California and I have had my own personal experiences with them. Google reviews are also 85% con on these guys. I personally have had terrible service with them. Before you buy from.those guys do some research.

It would be worth to bite the bullet on the price tag from the actual maker than buy from ikon. At least you know it will be done right

chevy 3 · 03-18-2018, 07:14 PM

I just got mine in on Friday. It will be a little bit before I can put this on. Car is away in storage. But when I mount this I'll post pics. I'm still on the fence about looks and I didn't see the name plate in the pics till I opened mine. It's the only thing I'd change

TwentyTen2SSRS · 03-23-2018, 06:38 PM

Quote:

Originally Posted by chevy 3

I just got mine in on Friday. It will be a little bit before I can put this on. Car is away in storage. But when I mount this I'll post pics. I'm still on the fence about looks and I didn't see the name plate in the pics till I opened mine. It's the only thing I'd change

Could always fabricate something to cover their name up, should be simple ish. I have some coming myself but had a one off deal. Will be ere tomorrow and got idea for the “product placement”. Thinkinga reverse mood could cover it but waiting for it to arrive first to see

Sent from my iPhone using Tapatalk

davesnever · 03-24-2018, 11:52 AM

Yeah on a more positive note the the manufacturer's name is stamped on the very top on a more horizontal surface so probably not that prominent when viewed from other vehicles .I also noticed they had a picture of a Camaro with the rally stripe scheme integrated into it which looked pretty cool.
If they could come up with a better mounting solution I think it would be better tho, that's my decision breaker but I also live in an area where we get a lot of tree debris fallout so access to the windows is a necessity.

SSEssence · 03-26-2018, 10:21 AM

Not a fan, doesn't flow with the car, I would prefer the full width louver.

03-01-2018, 10:52 PM	#17
Rahnok Fish Poop Aficionado Drives: 2015 2LS SIM Join Date: Dec 2017 Location: Covington, GA Posts: 304 View My Garage	If you want to buy these, you can get 15% off using the code “PRIME5” on http://d2bdmotorwerks.com/i-23892657...kinz%26go%3DGo __________________

03-04-2018, 05:51 AM	#23
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	__________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

03-24-2018, 11:52 AM	#27
davesnever Drives: 2010 Camaro 2SS Join Date: Sep 2015 Location: Richmond Hill ,Ontario, Canada Posts: 780 View My Garage	Yeah on a more positive note the the manufacturer's name is stamped on the very top on a more horizontal surface so probably not that prominent when viewed from other vehicles .I also noticed they had a picture of a Camaro with the rally stripe scheme integrated into it which looked pretty cool. If they could come up with a better mounting solution I think it would be better tho, that's my decision breaker but I also live in an area where we get a lot of tree debris fallout so access to the windows is a necessity. Attached Images

03-26-2018, 10:21 AM	#28
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,802 View My Garage	Not a fan, doesn't flow with the car, I would prefer the full width louver. __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

03-04-2018, 03:39 PM	#24
Jake90195 Drives: 2010 2SS Camaro Join Date: May 2017 Location: Spring Creek NV Posts: 28	Badass and looks good but pricey for a rear window louver. On a side note don't buy anything from ikon. Their products my be cheaper but they are knockoffs. A lot of people complain about improper fitment, warping parts, pre painted parts by them aren't properly prepared or primed so paint flakes and comes off. They are a company out of California and I have had my own personal experiences with them. Google reviews are also 85% con on these guys. I personally have had terrible service with them. Before you buy from.those guys do some research. It would be worth to bite the bullet on the price tag from the actual maker than buy from ikon. At least you know it will be done right

03-18-2018, 07:14 PM	#25
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	I just got mine in on Friday. It will be a little bit before I can put this on. Car is away in storage. But when I mount this I'll post pics. I'm still on the fence about looks and I didn't see the name plate in the pics till I opened mine. It's the only thing I'd change