(Day 9) - The Twelve Days of Christmas Technical Posts - a New Product Everyday!!

[MTI Racing]

MTI Racing’s Twelve Days of Christmas Technical Posts! (Day 9)

Commercial Thread at http://www.camaro5.com/forums/showthread.php?t=190074


Merry Christmas!!!
MTI Racing is highlighting a new product everyday 'til Christmas.

"On the 9th day of Christmas, my true love gave to me..."
Today’s special product is…

Please watch Video Below:



1) MTI Racing Seat Rails for Corvette
2) ZEX Nitrous for Camaro (5th Gen)


ZEX Nitrous for Camaro:

http://mtiracing.com/Purchase/New-20...en-Camaro.html

Zex Blackout Nitrous Kit for 2010 - 2012 Camaro Gen 5
Zex Part # B2380B

Product Description
ZEX™ engineers have custom designed a nitrous system specifically tailored to the 6.2L Gen V Camaro engine. This version adds 75-175 additional horsepower. Each kit is designed to have an easy installation, and Active Fuel Control™ adjusts fuel delivery with changes in bottle pressure to operate at a safe air/fuel ratio. The easy-to-install ZEX™ systems are available in both the classic purple or the new Blackout series with black powder coated bottle and all necessary accessories for a simple, 2-3 hour installation. With all the extra torque and horsepower, it’s not uncommon to see over one second improvements in the quarter mile.

V8 system adjustable from 75-175 additional HP
Active Fuel Control™ adjusts fuel delivery with changes in nitrous bottle pressure



Corvette Seat Rails:

http://mtiracing.com/Purchase/2005-2...TI-Racing.html

MTI Racing Billet Seat Rails # MTI-104001

These Billet Aluminum Seat rails are designed for your Corvette. They are made to mount your racing seat to the floor of your C5/C6/C6Z/ZR1 Corvette. This allows you to mount the seat as low as possible to accomodate taller drivers. Compatible with the Racetech, Sparco, OMP, Momo, Cobra, Corbeau and other racing seats.

The construction looks great and is absolutely functional. The quality is also in the details. Take for example, the vertical bend in the rail is radiused on the inside, to minimize stress in this area, which adds support add strength. The adjustable side brackets are bullnozed at the bottom, to match the inside radius of the rail, matching seamlessly together.

The side brackets can be mounted on the outside of the rails to accomodate offset seat positions. The rear section is slotted to adjust for a wide variety of racing seat templates. Additional holes in the seat rail can also be used for mounting submarine belts and harness eyelets. There is even a location for you to mount the factory yaw sensor.

Hardware is included to mount the MTI Racing Seat Rails in a Corvette (C5/C6/C6Z/C6ZR1).

*The MTI Racing Seat Rails can be fitted to racecars with gutted interiors.
(Seat Rail Dimensions are: 23" long x 3" wide )


Merry Christmas!!

Commercial Thread at http://www.camaro5.com/forums/showthread.php?t=190074