The Pittsburgh Thread - Page 521 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Swacer · 06-18-2013, 06:50 PM

Quote:

Originally Posted by Jamie Mac

When I had my car tuned it was done by Bryan@pcmforless at Lutz Racing in Mars. Bryan travels around the area tuning at different shops. I don't know if he still does but at the time, Bryan tuned the THR cars at Lutz. I've no way to judge his tune against anyone else's but I've not had any issues with it. Brendan, I bought the extended warranty for all the non drivetrain items. There's a ton of electronics on these and it's all tied together. I'd consider that before selling back your extended. I bought it with my heater core change in mind. I would NOT want to pay that bill. Just something to consider. Stainless Works headers go on relatively easy. The extensions were in the kit.

That's kinda what I was thinking in regards to the extended warranty, the non power train components. The more I think about it,the more I think I'll keep it.

Got a good price on headers, along with an installer and tuner, so might pull the trigger in the next two weeks I figure.

Seer · 06-19-2013, 09:05 AM

too nice of a day to be stuck in an office... ugh

Bumblebee2012 · 06-19-2013, 11:04 AM

Tell me about it. I'm writing procedures. I hate this.

Sent from my SCH-I605 using Tapatalk 4 Beta

Swacer · 06-19-2013, 12:00 PM

Quote:

Originally Posted by Bumblebee2012

Tell me about it. I'm writing procedures. I hate this.

Sent from my SCH-I605 using Tapatalk 4 Beta

+2 that. I'm probably reviewing procedures just like your'e writing lol

At least the camaro is outside haha

corndog · 06-19-2013, 12:37 PM

Hi, I am new to Camaro 5 and have heard rumors lately that there is a new speed shop in Hawthorne NJ that has a Dynojet. Is this true? I guess they are supposed to be doing a lot of LS stuff, cams, blowers and tuning. Has anyone heard of this place? Any reply would be appreciated. THX

Bumblebee2012 · 06-19-2013, 01:03 PM

Quote:

Originally Posted by corndog

Hi, I am new to Camaro 5 and have heard rumors lately that there is a new speed shop in Hawthorne NJ that has a Dynojet. Is this true? I guess they are supposed to be doing a lot of LS stuff, cams, blowers and tuning. Has anyone heard of this place? Any reply would be appreciated. THX

Troll much?

Bumblebee2012 · 06-19-2013, 01:09 PM

Hey,

Question for you all, how wide can you go on factory SS/RS wheels for both front and rear? Is the stock size about all you can use or will the car fit wider shoes easily with no mods?

Swacer · 06-19-2013, 01:13 PM

Quote:

Originally Posted by Bumblebee2012

Hey,

Question for you all, how wide can you go on factory SS/RS wheels for both front and rear? Is the stock size about all you can use or will the car fit wider shoes easily with no mods?

I've heard guys running 305s in the rear and 265s up front. Check the Wheel/Tire portion. its been asked a few times, I just forget the exact answer.

Trav2SS · 06-19-2013, 04:24 PM

I heard about 295 on the rear, but it' depend on the tire a bit

Seer · 06-19-2013, 10:19 PM

A nitto tire runs slightly narrower. If your rear wheel is 9.5" a nitto 305 will fit no problems.

Seer · 06-19-2013, 10:20 PM

Quote:

Originally Posted by Bumblebee2012

Tell me about it. I'm writing procedures. I hate this.

Sent from my SCH-I605 using Tapatalk 4 Beta

Quote:

Originally Posted by Swacer

+2 that. I'm probably reviewing procedures just like your'e writing lol

At least the camaro is outside haha

I'm the guy who found holes in your process and tells you to rewrite your procedures because they are not good enough, then I review them and recreate your entire structure

Trav2SS · 06-20-2013, 12:09 PM

tahseenmahmood · 06-20-2013, 02:00 PM

Weight reduction modd... i like it.. lol

im sure it does mid 6's

Seer · 06-20-2013, 02:47 PM

Quote:

Originally Posted by tahseenmahmood

Weight reduction modd... i like it.. lol

im sure it does mid 6's

Most likely not even in the 1/8

06-19-2013, 12:37 PM	#7285
corndog Drives: 2010 camaro ss Join Date: Jun 2013 Location: Hawthorne Posts: 1	Hawthorne NJ Speed Shop Hi, I am new to Camaro 5 and have heard rumors lately that there is a new speed shop in Hawthorne NJ that has a Dynojet. Is this true? I guess they are supposed to be doing a lot of LS stuff, cams, blowers and tuning. Has anyone heard of this place? Any reply would be appreciated. THX

06-19-2013, 04:24 PM	#7289
Trav2SS MTMTEYE Drives: 2010 Camaro 2SS Join Date: Jul 2010 Location: Pittsburgh Posts: 637	I heard about 295 on the rear, but it' depend on the tire a bit __________________ MTMTEYE 2010 2SS/RS M6 Aftermarket bolt on parts and tune.. 434hp/395tq Daily Driver.

06-20-2013, 12:09 PM	#7292
Trav2SS MTMTEYE Drives: 2010 Camaro 2SS Join Date: Jul 2010 Location: Pittsburgh Posts: 637	__________________ MTMTEYE 2010 2SS/RS M6 Aftermarket bolt on parts and tune.. 434hp/395tq Daily Driver.

06-20-2013, 02:00 PM	#7293
tahseenmahmood Mr. Ricer Drives: Camaro 2LT Join Date: Jun 2012 Location: Pittsburgh Posts: 1,057	Weight reduction modd... i like it.. lol im sure it does mid 6's __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All order status requests in here (up to status 3800). List of Order Status Codes.	GTAHVIT	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	54436	12-28-2016 08:04 AM
Suggestion: Explanation to thread starters for their threads being locked?	colin911	Site Related Announcements / Suggestions / Feedback / Questions	2	12-06-2009 10:25 PM
Missing "Ladies of Camaro 5" thread comment....	Silverado	Off-topic Discussions	2	10-08-2009 12:23 PM
prices thread	nimnels	5th Gen Camaro SS LS LT General Discussions	1	05-02-2009 06:47 PM

06-19-2013, 09:05 AM	#7282
Seer Drives: 2015 Mustang GT Join Date: Mar 2012 Location: Cranberry Township, PA Posts: 1,098	too nice of a day to be stuck in an office... ugh

06-19-2013, 11:04 AM	#7283
Bumblebee2012 Drives: 2012 2SS TF3, 1971 Chevelle Join Date: Feb 2012 Location: Pittsburgh, Pa Posts: 840	Tell me about it. I'm writing procedures. I hate this. Sent from my SCH-I605 using Tapatalk 4 Beta

06-19-2013, 01:09 PM	#7287
Bumblebee2012 Drives: 2012 2SS TF3, 1971 Chevelle Join Date: Feb 2012 Location: Pittsburgh, Pa Posts: 840	Hey, Question for you all, how wide can you go on factory SS/RS wheels for both front and rear? Is the stock size about all you can use or will the car fit wider shoes easily with no mods?

06-19-2013, 10:19 PM	#7290
Seer Drives: 2015 Mustang GT Join Date: Mar 2012 Location: Cranberry Township, PA Posts: 1,098	A nitto tire runs slightly narrower. If your rear wheel is 9.5" a nitto 305 will fit no problems.