03-21-2019, 10:55 AM | #1 |
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
How would this backup camera be installed?
I just purchased this:
https://www.amazon.com/gp/product/B07H852D49 And now after looking at it - I am not too sure on how the install will go... The design looks like you would have to drill a hole above the license plate and then get behind there to screw in a nut to tighten it down. I took off the back plastic siding in the trunk and it looks like it's solid metal and I would have to drill a hole to gain access? I MIGHT be able to stick my fingers in through the license plate lights? But I don't think I would be able to get it tightened down very well? Ideas?
__________________
- J. Michael Henry |
03-21-2019, 03:49 PM | #2 | |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,190
|
Quote:
__________________
•2011 Camaro SS 2SS/RS A6
•MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp |
|
03-21-2019, 04:14 PM | #3 |
2011 Camaro Newbie
Drives: 2011 Camaro 2SS (With RS package) Join Date: Dec 2010
Location: Dallas, Texas
Posts: 120
|
I already have everything run but I am not too sure how to mount the camera to the car.
After I drill a hole, I will need to get behind there to screw in a nut to tighten the camera down. How would I do this? Will I need to make a decent size hole to gain access to that space?
__________________
- J. Michael Henry |
03-21-2019, 04:57 PM | #4 |
Drives: 2015 Z/28, 2015 1LE Join Date: Feb 2017
Location: Nevada
Posts: 583
|
Have you thought about removing the bumper altogether? It is not all that complicated, with just a few screws and then a lot of tugging at it. Give you a lot more options on how to mount it.
|
03-21-2019, 05:12 PM | #5 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
Unscrew or cut the stud off the camera and use a good double-sided 3m tape.
I mounted my front camera with heavy duty 3m double-sided tape 5 years ago. |
|
|
|
|