Almost done with V6 LFX to L99/ TR6060 swap

[mr_honez]

Originally Posted by Marlon1LS

Ok so here’s the deal all the control modules do not need to be reflashed. I got tired of hearing that with no proof. The only thing that I reflashed was the E38 that I already had and had flashed once before. I used an old BCM from another car same year and respective trim I.E. 2012 1LS v6 Camaro manual / 2012 1SS v8 Camaro manual. Flash vin in E38 and tune off Vats and clutch pedal sensor. That should get a solid crank if your E38 tables are good. Everything else is still v6 modules including instrument panel and FPCM etc. I’ll have more details later.

That's awesome to hear. Subbed to your Youtube channel as well, hope to do to mine what you have done to yours.

[Marlon1LS]

Well it seems I can’t post videos here...


Sent from my iPhone using Tapatalk

[InFiD3ViL]

Originally Posted by Marlon1LS

Well it seems I can’t post videos here...


Sent from my iPhone using Tapatalk

You try just posting the full YouTube link? It should auto-embed as soon as you save the post.

[Marlon1LS]

https://www.instagram.com/p/B0cucvpl...=1hdcigszhek2g


Sent from my iPhone using Tapatalk

[Xmetal]

Im about to embark on this conversion myself with an LS3 conversion. im sure Ill be pm'ing you asking lots of questions. BTW thank you for your service!

[kipps]

Originally Posted by Marlon1LS

...Flash vin in E38 and tune off Vats and clutch pedal sensor. That should get a solid crank if your E38 tables are good....

Can you clarify? Did you disable the clutch pedal sensor only for initial start-up? Why? I thought the clutch pedal sensor went directly to the E38, so it should have worked fine.

I'm attempting to install a gen iv 5.3 truck engine into an older pickup, and want to use a manual transmission. To do so, it appears the best method is to flash the ecm to a camaro SS ls3 tune, and use a matching camaro bcm for cruise and smart charging. Then I'll be repopulating the camaro tune with the truck VE tables, spark tables, etc.

[Marlon1LS]

Originally Posted by kipps

Can you clarify? Did you disable the clutch pedal sensor only for initial start-up? Why? I thought the clutch pedal sensor went directly to the E38, so it should have worked fine.

I'm attempting to install a gen iv 5.3 truck engine into an older pickup, and want to use a manual transmission. To do so, it appears the best method is to flash the ecm to a camaro SS ls3 tune, and use a matching camaro bcm for cruise and smart charging. Then I'll be repopulating the camaro tune with the truck VE tables, spark tables, etc.

I did have it disabled at one point , but now everything is enabled. Even onStar lol.


Sent from my iPhone using Tapatalk

[leanjay]

I went the opposite direction. manual trans. over to auto trans. 2ss model.i have some questions for you. my car starts and runs but trans. does not communicate with the car. by using my autel scanner I have found the bcm vin does not match the car. the tcm vin does not match the car, the ebcm vine does not match the car. did you have any luck changing the vin in the used module you swapped in? thanks for any help..

[Marlon1LS]

I'm confused. are you running an auto or manual? I have a manual.

[leanjay]

my car was an manual from the factory. I have since changed it over to an automatic. my question was concerning module programming. specifly programming used modules.

[Marlon1LS]

Originally Posted by leanjay

my car was an manual from the factory. I have since changed it over to an automatic. my question was concerning module programming. specifly programming used modules.

There is a thread on this topic. There are a few that have went from manual to auto. Bo White and NightOwl are the two off the top of my head that I know swapped trannies. Bo did what you did. and NightOwl swapped to manual. They are both on Camaro5.

[Marlon1LS]

https://www.instagram.com/p/B8forNWF..._web_copy_link
Idle video

[Xmetal]

Originally Posted by Marlon1LS

For the record a donor car isn’t necessary I ordered BCM from ebay from a reputable seller that confirmed vin for v8 manual Camaro 2012 1SS via vin lookup. And E38 from GM direct, caution if ordering from them do not use a VIN as they will send a pre-filled ECM that will more than likely be incorrect and cause more work than necessary.... trust I know from experience.

Pardon my ignorance but what is an “E38”?

[Batmanntexas]

Originally Posted by Xmetal

Pardon my ignorance but what is an “E38”?

E38 is the model of the ECM that is found in LS3/L99 Camaros. The ZL1 Camaro has an E67 ECM, for example.