05-02-2018, 11:57 AM | #1 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
5th gen ZL1/ 1LE square setup pic requests
Hi All,
Planning my first purchase and looking at the 1LE style rims in 10x 20 +23mm all around with 285/35/20 tires. I don't see many that aren't staggared. Does anyone have pics of this setup? Or what else could I do for a bit more nimble feel? |
05-02-2018, 12:31 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
32mm solid or 35mm hollow rear sway bar
28mm front bar Bilstien B6s Solid cradle bushings Z28 Links and Upper control arm bushings Quality lowering springs. I have everything except springs and shocks which I'm working on. Also might to think about 3.91 gears in the diff.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-02-2018, 01:23 PM | #3 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
I'd like to see pics with this setup if possible.
I am just getting the car and have to choose my mods wisely. I think the gears would be best off the bat, but if the tires and suspension are garbage it doesn't make sense. Thing is, these mods are very costly. 2500 bucks just for wheels/tires. |
05-03-2018, 04:20 PM | #4 |
Drives: 2015 SS/RS 1LE Join Date: Dec 2014
Location: Milwaukee, WI
Posts: 537
|
Unless your getting the wheels for looks, take the $2500 and put it towards the suspension. Springs, B6 struts, 1le front , jpss rear sway bars, jpss front radius arm bushings, jpss front caster locks, Z28 RUCA, trailing arms and toe links, solid cradle bushings. Way more improvement than wheels. Not sure if can do the work yourself but would save money for parts.
|
05-03-2018, 05:11 PM | #5 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
That's not happening right now. Just plopped a decent down payment to buy the car. Unfortunately I didn't get a 1LE, but thats what I intend to replicate eventually.
|
05-03-2018, 05:43 PM | #6 |
Drives: 2015 SS/RS 1LE Join Date: Dec 2014
Location: Milwaukee, WI
Posts: 537
|
Whatcha gettin?
|
05-03-2018, 06:43 PM | #7 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
What's the color?
2010 1SS, AGM, not nightfall gray. I had to buy out of state since there are not many 5th gens near me. If I traded my daily I would've gotten a 1LE, but since I didn't I had to keep my threshold lower. So gradually, But of course I want gears, drop, wheels tires. I don't count exhaust. |
05-04-2018, 03:44 AM | #8 |
BowtieBelle's SS
Drives: 2010 Camaro SS Join Date: Jan 2012
Location: Perry, ok
Posts: 1,074
|
Message me your email or phone number and I’ll send ya pics of mine.
2010 ss on 1LE wheels and 285/35 all around. Lowered on ridetwch coil overs.
__________________
|
05-04-2018, 06:59 AM | #9 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
|
05-04-2018, 07:05 AM | #10 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
Ah yes, CGM it is. I had a lapse. I call it Gray..
Not much in the way of rim colors that make it pop. I want either gen of 1LE wheels, but the black seems to get lost with the darkness of the gray. I'd love to see the MRR017 on CGM with the Graphite finish. |
05-04-2018, 07:42 AM | #11 |
Drives: 2015 SS/RS 1LE Join Date: Dec 2014
Location: Milwaukee, WI
Posts: 537
|
That's my favorite color of the Gen 5's and I like it with the black wheels, limo tint and blacked out chrome pieces. Looks awesome at sunset/night. Good luck....
|
05-04-2018, 12:01 PM | #12 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
1LE Wheels
There 6th Gen but still the same sizes and off sets.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-04-2018, 12:04 PM | #13 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
Those wheels look incredible. Is the car lowered at all?
I only plan to go 1 inch probably not more. I also wanted to judge the color scheme graphite vs. CGM or matte black 1LE's (5thgen) |
05-04-2018, 01:10 PM | #14 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
what... what.... what.... (I just ordered some VS Forged VS01 in matte black)
|
|
|
|
|