12-10-2013, 09:25 PM | #1 |
Drives: 2010 CGM Camaro 2SS/RS Join Date: Jun 2012
Location: Los Angeles
Posts: 46
|
RPI Splitter
Anyone with a RPI Designs splitter on their SS experience it being not sturdy or had to replace? I just bought one and It looks like my Camaro would eat that thing up for lunch.. any feed back?
|
12-10-2013, 09:27 PM | #2 |
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I have one on mine and it has taken a pretty good beating and still looks pretty good... my only advice is watch for parking curbs
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
12-10-2013, 10:42 PM | #3 |
Drives: 2010 CGM Camaro 2SS/RS Join Date: Jun 2012
Location: Los Angeles
Posts: 46
|
How long have you had it?
|
12-11-2013, 07:25 AM | #4 |
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,529
|
it's been on for almost 2 years. Will do a little touch up around the base of it this winter. Held up great and the car is lowered.
|
12-11-2013, 09:20 AM | #5 |
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I have had it over 6 months already
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
12-11-2013, 12:18 PM | #6 |
Drives: 11 ss/rs RJT w/Black Cherry stripes Join Date: Sep 2010
Location: Little Egg Harbor New Jersey
Posts: 2,180
|
I have the splitter from RPI and the only problem I had was with the quality of the paint. Don from RPI worked hard to resolve my issue and I sent it to be repainted problem solved. I am lowered 1.25 and so far so good my only concern is staying away from the parking curbs. The install was pretty easy but when I had to remove it for repaint I bought 8 rubber plugs with screws that fit through the holes and when tightened the rubber spreads keeping it tight, the only place I used the provided nut and bolt is on the corners in front of the tires. You really need small arms to reach up and place the nut on the bolt 10 times.
__________________
Last edited by 2011ss/rs; 12-11-2013 at 12:30 PM. |
12-11-2013, 03:02 PM | #7 |
Obsessed
Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011
Location: Riverview, FL
Posts: 2,603
|
RPI ZL-1 Style here, only issue is is chips VERY easy.
I don't think it would survive hitting anything though.
__________________
2016 Hyper Blue 2SS |
12-11-2013, 05:21 PM | #8 | |
Finally Satisfied
Drives: 2017 Hyper Blue 2SS M6 Join Date: Nov 2009
Location: St. Marys, OH
Posts: 533
|
Quote:
Now parking curbs are another story! I would stay away from them no matter what splitter you install. Especially if you have lowering springs. |
|
12-11-2013, 06:40 PM | #9 |
Drives: 11 ss/rs RJT w/Black Cherry stripes Join Date: Sep 2010
Location: Little Egg Harbor New Jersey
Posts: 2,180
|
Agreed curbs can scary on a lowered car.
__________________
|
12-11-2013, 06:43 PM | #10 |
Drives: 11 ss/rs RJT w/Black Cherry stripes Join Date: Sep 2010
Location: Little Egg Harbor New Jersey
Posts: 2,180
|
As far as the chipping goes I sent mine for a repaint to a local shop. They took everything down to the glass and started over no problems with the chips now
__________________
|
12-11-2013, 07:06 PM | #11 |
|
I have one. The California roads did a number on it but it's okay.
|
12-11-2013, 08:02 PM | #12 |
Drives: '14 SIM 2LT/RS Vert Join Date: Aug 2010
Location: Concord, NC
Posts: 1,412
|
I'm lovin' mine!
__________________
|
12-17-2013, 06:59 PM | #13 |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
|
12-17-2013, 07:48 PM | #14 |
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
its the RPI splitter but with a carbon fiber look
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
|
|
|
|