05-05-2014, 05:11 PM | #29 |
Drives: 2013 Black Camaro 2SS/RS Convert. Join Date: Jun 2013
Location: Sauk Village, Illinois
Posts: 506
|
mylink bezel
Tasks for all the communications. Very detailed pics. Well that be a problem with the two broken tabs when trying to put everything back together?
__________________
2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.
|
05-05-2014, 05:14 PM | #30 |
COTW 11/18/2013
|
Not sure... Most likely I can put a dab of superglue on the black tab to hold the ribbon in place... I believe it just needs to make contact. Will let everyone know when I get it back from my carbon guy.
|
05-05-2014, 07:41 PM | #31 | |
Drives: 2014 Red Hot 2SS/RS Camaro 1LE Join Date: Dec 2013
Location: Jacksonville, FL
Posts: 108
|
Quote:
With the ribbon clips.... Leave the bottom ones clipped. Top ones after you put the top circuit board on they will be laying right in position to clip. Very easy, but I was worried when I did mine too. Sent from my iPhone using Tapatalk
__________________
-Fish
2014 Red Hot 2SS 1LE, SP LT headers and HF Cats, CAI intake, lots little crap here and there. 2005 Laguna Blue Matte GTO, RMR CF body Kit, Banshee hood, OBX LT headers, HF Cats, Vararam OTR intake, little crap on this ride too. |
|
08-27-2014, 04:45 PM | #32 |
Drives: 2012 Ashen ZL1 Join Date: Nov 2011
Location: Miami
Posts: 552
|
Any pics?
|
08-27-2014, 04:53 PM | #33 |
COTW 11/18/2013
|
No, not yet. Having trouble getting the resin to lay right
|
11-15-2014, 04:53 PM | #34 |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
Radio face plate hydro-dipped
Guys, here is how my radio face plate turned out after I hydro-dipped it myself. For the fan and other hash marks I cut out the areas with tape by using a hole punch. I used a pice of clear tape for the hazard triangle. Got the hydro-dip done then removed all the tape pieces, then clear coated. I also did the center vent. It looks really good!
Bill
__________________
Build Thread: 2018 ZL1 Vert Purchased (Overpar73)
|
05-04-2015, 10:07 PM | #35 |
COTW 11/18/2013
|
Finally Done!!!
Took about an hour to put back together! Totally worth it!
|
05-04-2015, 10:09 PM | #36 |
COTW 11/18/2013
|
Gorgeous!!!!
|
05-06-2015, 10:00 PM | #37 |
Drives: 2014 2SS/RS VERT Join Date: Mar 2015
Location: Idaho
Posts: 455
|
looks great! Now put a piece of CF over your scratched up ignition. I did and I'm shocked how many people notice it!
__________________
2014 2SS/RS Vert.
"Today I didn't even have to use my AK, I got ta' say it was a good day" |
05-07-2015, 06:39 AM | #38 |
COTW 11/18/2013
|
It's not actual that scratched. Buffs right out.
|
07-28-2015, 04:53 AM | #39 |
Drives: camaro Join Date: Dec 2013
Location: simpsonville sc
Posts: 29
|
How did you get the knobs off I'm swapping the leds in the unit and can't seem to get them off really
|
07-28-2015, 05:06 AM | #40 |
COTW 11/18/2013
|
The volume and menu buttons snap out from the back and the larger ones are screwed in from the back.
|
|
|
|
|