10-21-2011, 06:06 PM | #1 |
Drives: '10 Camaro 2SS,04 Colorado,06 ZX6R Join Date: May 2008
Location: Chambersburg, PA
Posts: 524
|
Losing Connection
Okay - this is a weird one. The first thing that happened to me today was a "Service Stabilitrac" message kept going on then off then on then off. I ignored it for the time being until I could try some things I found in another thread on here.
The biggest issue I had today, and had once before, is somehow my entire car loses connection with the ECM, TCM, BCM and a ton of other things, throttle control, etc - I get about 50 codes thrown when this happens and the engine goes into "power reduced" mode. First time this happened was on a 70MPH highway - not fun, max speed was 35 MPH in the middle of a lot of traffic. Today it was on a back road, try pulling a hill in power reduced mode. Anyway, resetting the codes get the engine back up and running fine, but I don't understand why it happens. The first time it happened I was right next to a dealer and had them take a look and they asked if I had a power failure. If I did it was a split second, radio never went out, lights never went, its just like the engine didn't want to work anymore randomly. Any insight on this would be appreciated. The dealer said, again, it was a power failure, but the battery is fine. Also - it happens when you hit WOT for a couple seconds and then just full off. At least that is what happened the two times it happened to me. Thanks everyone!
__________________
Vararam CAI, ARH Headers, Flowmaster Exhaust, Nitto NT555Rs, Custom CAM and Tune - 11.981 @ 116.27
IOM - 2SS/RS - Auto - IAP - Sunroof - Ordered 10/13 (#7 at dealer) 3000(accepted to production ): 4/19/09 3300 (scheduled for prod ): 5/11/09 3400 (broadcast ): 5/16/09 3800 (produced ): 5/22/09 4150 (invoiced ): 6/01/09 4200 (shipped ): 6/01/09 5000 (at dealer ): 6/12/09 6000 (delivery to me ): 6/12/09 |
10-24-2011, 03:21 PM | #2 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Hi Ricky. Sorry to hear you're having issues with your Camaro. The next time this happens to you you might want to see if you can get it into a different dealer to see if you can get a second opinion. Hopefully that resolves the issues. Please keep me updated on how things for you with this issue.
Jeff Morris, Chevrolet Customer Service |
11-02-2011, 11:12 AM | #3 | |
Drives: '10 Camaro 2SS,04 Colorado,06 ZX6R Join Date: May 2008
Location: Chambersburg, PA
Posts: 524
|
Quote:
__________________
Vararam CAI, ARH Headers, Flowmaster Exhaust, Nitto NT555Rs, Custom CAM and Tune - 11.981 @ 116.27
IOM - 2SS/RS - Auto - IAP - Sunroof - Ordered 10/13 (#7 at dealer) 3000(accepted to production ): 4/19/09 3300 (scheduled for prod ): 5/11/09 3400 (broadcast ): 5/16/09 3800 (produced ): 5/22/09 4150 (invoiced ): 6/01/09 4200 (shipped ): 6/01/09 5000 (at dealer ): 6/12/09 6000 (delivery to me ): 6/12/09 |
|
11-02-2011, 12:31 PM | #4 |
Drives: 2010 camaro 2SS LS3 Join Date: Aug 2011
Location: Denver
Posts: 1,334
|
sounds like your throttle body is closing too much.
|
11-02-2011, 01:34 PM | #5 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Ricky you might be able to get your car taken to the dealer with Roadside Assistance. They should be able to get you all taken care of and your way to being repaired. If you're unable to get the vehicle to the dealer let me know and I'll do what I can to assist you.
Jeff Morris, Chevrolet Customer Service |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I'm losing interest :( | Jason7 | USA - California | 37 | 07-23-2011 07:29 AM |
4 connection coil to 2 connection coil, how to? | 2ndgenz28 | 3rd Generation Camaros | 0 | 06-15-2011 07:47 PM |
HELP NEEDED - Throttle electrical connection loose .. | Crowley | Forced Induction - V8 | 0 | 10-18-2010 03:03 PM |
Hello from Injection Connection | IConnection | Forced Induction | 1 | 10-22-2009 01:02 PM |
Welcome to Injection Connection!!!! | IConnection | V8 Bolt-Ons & Tunes | 0 | 10-09-2009 12:07 PM |