06-03-2013, 06:20 PM | #29 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
If I don't have enough room to plug in my PAC SOEM-4 behind the radio than where is the best place to pick up the signal for my factory radio to convert into RCA outputs?
|
06-03-2013, 06:45 PM | #30 |
Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012
Location: porterville ca
Posts: 543
|
Right at the factory amp in the trunk
|
06-03-2013, 06:53 PM | #31 |
Drives: 2ss/rs vr 6m Join Date: Mar 2009
Location: New Port Richey,fl
Posts: 2,831
|
If he had the factory amp he wouldn't need the PAC
|
06-03-2013, 09:44 PM | #32 |
Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012
Location: porterville ca
Posts: 543
|
Didn't notice it was a non BA system
|
06-03-2013, 09:49 PM | #33 |
Drives: 13' Sw 2ss Ls3 Join Date: Dec 2012
Location: porterville ca
Posts: 543
|
If ur only putting in subs I would get the signal from the rear 6x9s if ur really wanting to mount up by the radio run leads with longer wire to the loc and mount it in another spot
|
06-06-2013, 10:56 PM | #34 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
When running the PAC off of the rear speakers won't that cause the bass to be distorted? Will I have to turn the bass down on my front & rear speakers to make it sound right?
|
06-08-2013, 08:35 AM | #35 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Starting my install today and got my radio out and there is plenty of room above the radio for the PAC. I will let you know how everything goes.
|
06-08-2013, 03:51 PM | #36 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Got my system installed today! Ran the PAC behind the radio with the Factory T-connector and it fit. The only thing is if I want to adjust things I will have to remove the radio again. If I have to do that I might extend the wires and mount it in the glove compartment for easy adjustment in the future. Ran all the wires under the kick panels to the back. When I get my 6.5 and 6X9 speakers I will take everything apart and extend the wires then. The system sounds great just like I wanted. I did decide to mount the amp to the back of the box for now. I added a switch to the amps remote wire so I could turn off the amp when I just want to relax and listen to the factory radio or when the kids are in the back seat. Pictures later!!
|
06-08-2013, 08:32 PM | #37 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
Where are you grounding your aftermarket amp? I have never installed a amp in a car with the battery in the trunk and was told it is not a good idea to ground the amp at the battery. So show me where you grounded yours. Thanks
|
06-08-2013, 10:01 PM | #38 |
Drives: 2ss/rs vr 6m Join Date: Mar 2009
Location: New Port Richey,fl
Posts: 2,831
|
Uhmm.. Post 3, in the pic you can see where i grounded it to the body.Didn't u ask that before, like in the Original post.
|
06-08-2013, 10:10 PM | #39 |
Teenage Dream Camaro
Drives: A Visually Stunning Camaro Join Date: Feb 2013
Location: Florida
Posts: 1,722
|
Definately going to get this professionaly done.
|
06-09-2013, 12:24 AM | #40 |
HTCC Member
|
|
06-09-2013, 12:32 AM | #41 |
Drives: 2016 2SS, Summit White, A8, NPP Join Date: Apr 2013
Location: Arkansas
Posts: 717
|
What does the battery in the trunk have to do with amp installation. You do it like you did all the others.
|
06-09-2013, 04:13 AM | #42 |
Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012
Location: Indiana
Posts: 1,519
|
|
|
|
|
|