I need a 2.5" o.d. to 3" o.d. exhaust adapter!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Tyler360 · 04-07-2012, 04:43 PM

I bought the MBRP exhaust tips that match the ground effects kit. The thing is they are for a 3" exhaust system. The clamps on the tips have a 3" inner diameter. My exhaust system(Borla Atak) have a 2.5" outer diameter. I want to use sleeve clamps to hook the adapters up to the exhaust system, which means I need a 2.5" outer diameter to 3" outer diameter adapter. The only adapters I can find are 2.5" i.d to 3" o.d So, is there anywhere I can get these? Do they even exhist?

BigRed585Lbs · 04-07-2012, 04:57 PM

Any competent muffler shop should be able to expand the 2.5"id to a 2.5"od without any trouble.

Tyler360 · 04-07-2012, 06:32 PM

Quote:

Originally Posted by BigRed585Lbs

Any competent muffler shop should be able to expand the 2.5"id to a 2.5"od without any trouble.

It would need to be compressed, not expanded. 2.5 I.d is bigger than 2.5 o.d, but thanks for trying to help, I appreciate it

caverman · 04-07-2012, 07:43 PM

I think what he is trying to say would be to have the muffler shop expand your Borla catback to fit the 3" tips. They might be able to expand it to just under 3" so that the tips will fit pretty snug. Then you could probably have them welded on.

I would say to find a local muffler shop and see what they could do for you.

Tyler360 · 04-07-2012, 09:28 PM

Quote:

Originally Posted by caverman

I think what he is trying to say would be to have the muffler shop expand your Borla catback to fit the 3" tips. They might be able to expand it to just under 3" so that the tips will fit pretty snug. Then you could probably have them welded on.

I would say to find a local muffler shop and see what they could do for you.

Ah. The tips fit the adapter fine. It's between the adapter and the pipe that I'm having a problem. I'm trying to avoid welding and U-clamps. What I want is an adapter with a diameter that matches my pipe so I can put a band clamp over it. Which means the adapter has to have a 3" outer diameter on one end, and a 2.5" outer diameter on the other end, which would match the pipes outer diameter. Thanks for your input

04-07-2012, 04:43 PM	#1
Tyler360 Drives: 2011 Camaro 2SS/RS Join Date: Jul 2011 Location: Wittenberg, Wisconsin Posts: 701 View My Garage	I need a 2.5" o.d. to 3" o.d. exhaust adapter!! I bought the MBRP exhaust tips that match the ground effects kit. The thing is they are for a 3" exhaust system. The clamps on the tips have a 3" inner diameter. My exhaust system(Borla Atak) have a 2.5" outer diameter. I want to use sleeve clamps to hook the adapters up to the exhaust system, which means I need a 2.5" outer diameter to 3" outer diameter adapter. The only adapters I can find are 2.5" i.d to 3" o.d So, is there anywhere I can get these? Do they even exhist? __________________ My Build Thread:http://www.camaro5.com/forums/showthread.php?t=287531

04-07-2012, 07:43 PM	#4
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	I think what he is trying to say would be to have the muffler shop expand your Borla catback to fit the 3" tips. They might be able to expand it to just under 3" so that the tips will fit pretty snug. Then you could probably have them welded on. I would say to find a local muffler shop and see what they could do for you. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	3652	08-17-2023 02:50 PM
V8 Camaro Aftermarket Exhaust Video Clips Compilation	tjbusa	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	591	07-06-2022 08:38 AM
Sound level difference: 2.5" vs 3" exhaust	plastrd	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	23	10-11-2011 05:09 PM
MAGNAFLOW Cat-Back / Axle-Back Exhaust Systems \| FREE Shipping	Apex Paul	V8 Bolt-Ons & Tunes	134	01-24-2011 12:56 AM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM

04-07-2012, 04:57 PM	#2
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	Any competent muffler shop should be able to expand the 2.5"id to a 2.5"od without any trouble.